What E-Liquid Works Best in the Vaporesso XROS Range?

The Vaporesso XROS range is built for MTL vaping on refillable 2ml pods, so the e-liquid you choose matters more than the kit. Every current model, from the newest XROS 6 and XROS 6 Mini to the XROS 5, uses the same COREX mesh pod platform and suits 10mg and 20mg nic salts. This guide covers the liquid that works best: nic salts, bar salts, 50/50 shortfills and desserts, plus how the COREX pod you pick changes the flavour.

Leaning towards the XROS 6 itself? One of the owners here has had it in daily use since it arrived, and her XROS 6 review covers what that is genuinely like.

What VG/PG ratio works in a Vaporesso XROS?

XROS kits are MTL pod kits, so they perform best on a balanced or higher-PG liquid. A 50/50 VG/PG blend is the sweet spot, which is exactly what most 10ml nic salts and bar salts are mixed at. Higher-VG juice above 60% VG can still work on the wider 0.4 ohm and 0.6 ohm pods, but it wicks slower and mutes the throat hit, so for a tight cigarette-style draw stick to 50/50. Browse 50/50 shortfills if you prefer to mix your own nicotine strength.

Still deciding on a kit? Our comparison of the XROS 5 against the XROS 4 covers what changed in 2025.

Nic salts for the Vaporesso XROS

Nic salts are the natural match for the XROS. The smoother nicotine hit suits the MTL draw and the COREX mesh, and 10mg or 20mg gives most ex-smokers enough without harshness. There are over 500 nic salt flavours to fill from, and Vaporesso makes its own range too: DojoLiq nic salts are mixed at 50/50 and tuned for XROS pods. Pick 20mg for a heavier smoker and 10mg for a lighter one.

Bar salts for the Vaporesso XROS

Bar salts are the fastest-growing choice for pod kits, because they copy the flavours of popular disposables in a refillable 10ml bottle. They are still nic salts at 10mg or 20mg, so they drop straight into an XROS pod, and the sweeter disposable-style profiles are a big reason people switch. If a favourite disposable flavour is what you are chasing, start in the bar salts range and match it to a 0.8 ohm pod for the closest draw.

Can you use Elux liquid in a Vaporesso XROS?

Yes. Elux 10ml nic salts are 50/50 and work perfectly in every XROS pod. The two ranges to know are Elux Legend and Firerose, both from the Elux liquid range. For a fruity all-day vape, Elux Legend Kiwi Passionfruit Guava is one of the most popular Legend flavours, while Firerose Cherry Cola gives a sweeter fizzy-drink profile. Both sit well on a 0.8 ohm COREX pod at 20mg.

Best desserts for the Vaporesso XROS

Desserts are a standout category on the XROS, and the smooth MTL draw really shows off a custard or bakery flavour. Pablo's Cake Shop is the range to start with, and Salted Caramel Profiteroles is a rich, moreish choice that vapes beautifully on a 1.0 ohm or 1.2 ohm pod. For a biscuit-and-cream twist, the Bombo range has Cookie Supra Reserve. Dessert salts are usually 50/50, so they wick cleanly in the tighter, higher-resistance XROS pods where the flavour comes through best.

COREX 2.0 vs COREX 3.0: which pod for flavour?

The pod you choose changes the flavour as much as the liquid. Both COREX 2.0 and COREX 3.0 pods fit every current XROS kit, and both come in the same resistances. COREX 3.0 is the newer mesh, giving around 30% more coil life and holding flavour for longer, while COREX 2.0 is the lower-cost option that still performs well. Match the resistance to your liquid and draw:

As a rule, lower resistance suits fruit and sweeter profiles, while the tighter 1.0 ohm and 1.2 ohm pods bring out desserts, tobacco and menthol.

Which nicotine strength for which XROS pod?

Resistance and strength move in opposite directions. The lower the ohms, the more vapour each puff makes, so the less nicotine the liquid needs.

As a rule of thumb for the table above: the 0.4 ohm wants a 50/50 or 70/30 liquid rather than strong salts, the 0.6 ohm takes 50/50 or a 10mg salt, the 0.8 ohm handles 10mg and 20mg equally well, and the 1.0 and 1.2 ohm are built for 20mg salts.

The 1.2 ohm pod is the case people get wrong. Its tight draw and small vapour output mean 20mg isn't just acceptable there, it's usually necessary, and it's the closest an XROS gets to the strength-per-puff of a cigarette.

Heavy ex-smokers who found 20mg harsh on a looser pod often get on fine with it here.

Asked to pick one pod for salt nic across the board, we'd say the 0.8 ohm: it takes 10mg and 20mg equally well and suits every draw style short of the loosest.

And if you're stepping your nicotine down over time, nothing about the pods forces you to stay put, since every resistance takes a lower strength happily. Our nic salt strengths guide goes deeper on picking a starting strength.

Will an XROS give you enough throat hit?

Yes, if you line up three variables.

• Strength does the most: 20mg salt gives a firm catch at the back of the throat, 10mg a softer one.
• Resistance is next, with the 1.0 and 1.2 ohm pods giving the sharpest cigarette-like scratch.
• Airflow finishes the job, and closing the slider tightens the hit further.

An XROS on a 1.2 ohm pod with 20mg salt and near-closed airflow is about as close to a cigarette's throat hit as any pod kit manages.

Does Vaporesso make its own e-liquid?

Yes. Vaporesso makes DojoLiq, a 10ml nic salt range mixed at 50/50 and designed around the COREX pod. It is a safe first choice if you want a liquid built for the kit, though any 50/50 nic salt or bar salt will work just as well.

Tips for the best flavour from your XROS

Prime a new pod by filling it and leaving it to stand for five minutes before the first vape, so the mesh soaks through. Match the nicotine to your habit, 20mg for heavier smokers and 10mg for lighter ones. Change the pod when the flavour dulls, usually every 5 to 8 refills. If you are new to the range, our XROS beginner guide covers filling and settings, and the XROS which-model guide helps you pick the right kit.