Vaporesso XROS 6 Pod Kit

The Vaporesso XROS 6 is the newest pod kit in the XROS series with an 1800mAh battery, VENTURI airflow, COREX 3.0 mesh pods, and a 0.88 inch TFT screen. Output runs 5-30W across three power modes (Eco, Normal, Power) with adjustable airflow for MTL and RDTL vaping. The XROS 6 takes the full range of XROS pods from 0.4 ohm through to 1.2 ohm, so existing pods click straight in.

Two COREX 3.0 mesh pods come in the box: a 0.8 ohm pod pre-installed for MTL vaping and a 0.6 ohm pod for restricted direct lung. Both pair best with 50% VG e-liquids and nic salts. Fires on either button press or inhale-only auto-draw, the user picks. Coil priming takes 60 seconds, so you're vaping within a minute of dropping in a fresh pod. Pairs with nic salts and 50/50 e-liquids.

Eleven colours available across zinc alloy and aluminium alloy body finishes. USB-C cable included. If you're not sure which XROS kit suits you best, our XROS series comparison guide covers all models side by side.

Key Features

• 1800mAh Battery - approximately 5 days vaping per charge
• 3A USB-C Fast Charging - full top-up in under 45 minutes
• VENTURI Airflow - smoother, more intense draw
• COREX 3.0 Mesh Pods - 0.8 ohm and 0.6 ohm in the box
• Three Power Modes - Eco, Normal and Power selectable
• Button and Auto-Draw - press to fire or inhale to vape
• 0.88 inch TFT Display - live battery, wattage and puff count
• Anti-Leaking v2.0 - upgraded SSS pod seal
• 60-Second Coil Priming - ready to vape inside a minute
• Full XROS Pod Range - works with every XROS pod from 0.4 to 1.2 ohm
• 11 Colours - zinc alloy and aluminium alloy finishes

Up to 5 Days Per Charge

The 1800mAh battery on the Vaporesso XROS 6 is the biggest yet in the XROS line. For an average MTL vaper, that works out at approximately 5 days between charges. The kit reads battery percentage on the 0.88 inch TFT screen, so you can see exactly where you are rather than guessing off an indicator. Battery health stays stable across long charging cycles thanks to the integrated charge management.

3A USB-C Fast Charging

3A USB-C fast charging takes the XROS 6 from empty to full in under 45 minutes. The USB-C cable comes in the box. For most vapers a quick 15 minute top-up is enough for several hours of vaping. Reverse-polarity protection on the port means the cable goes in either way round.

VENTURI Airflow for a Smoother Draw

VENTURI airflow is the headline upgrade on the XROS 6. The internal pod channel narrows then widens through the chamber, pulling vapour across the coil more evenly and stripping out the harshness you sometimes get on a wide-open pull. The result is a richer flavour profile and a quieter draw. The side airflow slider opens from a tight cigarette-style MTL pull through to a looser RDTL hit, with enough mechanical resistance to stay put in a pocket.

COREX 3.0 Mesh Pods with Anti-Leak v2.0

COREX 3.0 is the third-generation mesh coil platform from Vaporesso. The mesh fires faster off the inhale, runs cooler through the draw, and pulls more flavour from nic salts and 50/50 blends than the older mesh tech. The XROS 6 ships with a 0.8 ohm COREX 3.0 pod pre-installed for MTL and a 0.6 ohm COREX 3.0 pod better suited to RDTL vaping. Anti-Leaking v2.0 on the pod seal locks e-liquid in place between sessions, even when the pod sits unused.

Three Power Modes

The XROS 6 runs three selectable power modes. Eco Mode conserves battery for the longest vape time between charges. Normal Mode delivers a consistent everyday vape balanced for flavour and battery life. Power Mode pushes the wattage up for a warmer, more intense draw. Double-press the side button to switch between modes or adjust the wattage manually within the 5-30W range.

Button and Auto-Draw Activation

The XROS 6 is one of the few pod kits in this price bracket to offer both firing modes. Press and hold the side button to fire on demand for a cleaner, more controlled first hit, or set the kit to inhale-only auto-draw for stealth vaping with no button press needed. Either way the AXON chipset reads the pod resistance and tunes the wattage to suit the coil.

0.88 inch TFT Display

The 0.88 inch HD TFT display shows live wattage, pod resistance, battery percentage and puff count. The dashboard updates with each draw. The display is clear in daylight, with a single button cycling through the on-screen options and mode adjustments.

XROS Series Pod Compatibility

The XROS 6 takes every pod in the Vaporesso XROS line. COREX 3.0 pods come in the box but older COREX 2.0 pods still fit too, on the same magnetic connector. Both pod generations cover the full resistance ladder.

XROS 6 Colours

Eleven colours on the XROS 6 across two body finishes.

Vaporesso XROS 6 Specifications

What's in the Box

• 1x Vaporesso XROS 6 Pod Vape Kit
• 1x 0.8 ohm Vaporesso XROS COREX 3.0 Pod (Pre-Installed)
• 1x 0.6 ohm Vaporesso XROS COREX 3.0 Pod (Spare)
• 1x Type-C Charging Cable
• 1x User Manual