OXVA Refillable Pod Range
OXVA pods are all refillable. You buy the pod, fill it with your own nic salt or freebase e-liquid, and refill it up to 20 times before the coil wears out. That's up to 40ml of e-liquid through a single pod depending on how you vape.
Every OXVA pod has a built-in mesh coil, so you don't buy separate coil heads. Once the flavour drops off, you swap the whole pod for a fresh one. No fiddling with coils or cotton.
|
Feature
|
What You Get
|
|
Pod Type
|
Refillable with built-in coil
|
|
Coil Tech
|
UniTech 2.0 mesh
|
|
Refills Per Pod
|
Up to 20
|
|
Leak Protection
|
5-layer built-in
|
|
Fill Method
|
Top-fill or side-fill (varies by range)
|
|
Resistances
|
0.2Ω, 0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω
|
OXVA Pod Resistances
OXVA pods run from 0.2Ω to 1.2Ω. Lower ohms give you warmer vapour and bigger clouds. Higher ohms pull tighter like a cigarette.
|
Resistance
|
Wattage
|
Vaping Style
|
Best E-Liquid
|
|
0.2Ω
|
45-60W
|
DTL clouds
|
High VG, 3-6mg
|
|
0.4Ω
|
26-38W
|
Loose RDL
|
50/50 or high VG
|
|
0.6Ω
|
20-25W
|
RDL/MTL
|
50/50, nic salt
|
|
0.8Ω
|
12-18W
|
MTL
|
Nic salt, 10-20mg
|
|
1.2Ω
|
10-12W
|
Tight MTL
|
20mg nic salt
|
Switching from a prefilled kit, go with 0.8Ω or 1.2Ω at 20mg nic salt. 0.2Ω pods are VPrime-only and require a high-power kit. Xlim and NeXlim devices do not support this resistance.
UniTech 2.0 Coils
Every OXVA pod has a UniTech 2.0 mesh coil built in. You don't buy coils separately. The coil lasts roughly 20 refills, then you swap the whole pod for a fresh one. Some ranges use dual mesh for stronger flavour per puff.
Cross-Kit Compatibility
One of the useful things about OXVA pods is that many of them work across more than one kit. If you've got an older OXVA vape and upgrade to a newer one in the same family, there's a good chance your leftover pods still fit. You're not stuck buying new pods every time OXVA releases a new kit.
Each pod range page on our site lists exactly which kits it works with, so check the specific pod you're after for the full compatibility list.
How to Fill OXVA Pods
All OXVA pods are refillable with their newest being the Xlim V3 refillable pods. The fill method depends on which range you've got, but both types are straightforward.
Top-fill pods (Xlim V3 and similar):
- Open the silicone bung on top of the pod
- Pour your e-liquid in through the fill port
- Close the bung and wait 2 minutes before vaping
- The pod stays in the kit the whole time
Side-fill pods (NeXlim, VPrime, and similar):
- Pull the pod out of the kit
- Open the side silicone plug
- Fill with e-liquid and close the plug
- Slot the pod back in and wait 2 minutes
Give it a couple of minutes after filling so the cotton soaks through. That stops dry hits on the first few puffs.
