Vaporesso XROS Pro 2 Vape Kit

The Vaporesso XROS Pro 2 is the most powerful kit in the Vaporesso XROS series to date, pairing a 2000mAh battery with a 65g magnesium alloy chassis that stays pocket-light through a full day of use. The XROS Pro 2 vape kit runs 5W to 30W across three power modes, driven by a 0.96 inch TFT colour screen and the COREX 3.0 Hive Mesh pod platform.

The Vaporesso XROS Pro 2 Pod Kit comes with two refillable pods - a 0.4 ohm pod for cloud-leaning RDL hits and a 0.6 ohm pod that sits neatly between loose MTL and light RDL. Existing XROS owners keep their pod investment as well: every legacy COREX 2.0 pod across the wider XROS pod range fits the Pro 2 chassis.

Key Features

• SUPER PULSE MODE - curve-flattened wattage delivery keeps the first puff at 100% battery identical to the last puff at 5%, with no fade as the battery drains.
• 2000MAH IN A 65G CHASSIS - 67% larger battery than the original XROS Pro 1200mAh, with no weight penalty thanks to the magnesium alloy frame.
• COREX 3.0 HIVE MESH PODS - honeycomb mesh structure delivers approximately 40% more aroma intensity and around 30% smoother airflow than COREX 2.0.
• 0.96 INCH TFT COLOUR SCREEN - live wattage in 0.1W steps, battery percentage, puff counter, coil resistance and active power mode at a glance.
• FULL XROS POD COMPATIBILITY - accepts the entire XROS pod range from 0.4 ohm to 1.2 ohm, across both COREX 2.0 and COREX 3.0 generations.
• AUTO-DRAW OR BUTTON-FIRE - switchable activation suits MTL inhalers and RDL users on the same kit, with a five-click lockout.
• USB-C 2A PASS-THROUGH CHARGING - approximately 50 minutes from empty to full, with vape-while-charging supported.

Vaporesso XROS Pro 2 Battery and Charging

The headline upgrade is the jump from 1200mAh on the original Pro to 2000mAh on the XROS Pro 2, with no weight penalty. Vaporesso has built the kit around a magnesium alloy frame to hold it at approximately 65g, lighter than most 1500mAh competitors on the UK pod kit market.

Most XROS Pro 2 vape kit owners will see around two days of moderate use between charges. Heavy RDL sessions on the 0.4 ohm pod will pull the battery down faster, so a top-up over lunch keeps the kit firing through evening sessions. Lighter MTL use on a 1.0 or 1.2 ohm pod can stretch a single charge across three days.

USB-C 2A fast charging takes the battery from empty to full in approximately 50 minutes. Pass-through is supported, so the XROS Pro 2 fires while plugged in if a session can't wait. A short LED at the base of the screen confirms charge status during top-ups.

Standard, Pulse and Super Pulse Power Modes

Three power modes sit behind the fire button on the 0.6 ohm and above pods. Standard mode locks the wattage at whatever the user dials in, ideal for vapers who want total control of the draw temperature.

Pulse mode runs a short power boost at the start of each draw before settling to the set wattage. The result is a quicker flavour ramp without raising overall power, useful for nic salt vapers who want a sharper top note on the inhale.

Super Pulse continuously trims the wattage curve so the draw at 100% battery feels identical to the draw at 5%. The fade-out that affects smaller pod kits as the battery drains is engineered out, which keeps flavour and vapour density consistent across the full charge cycle. Across the XROS Pro 2 vape kit wattage range of 5W to 30W, Super Pulse holds the chosen output until the battery enters its final 5% window.

COREX 3.0 Hive Mesh Pods and Compatibility

The included 0.4 ohm and 0.6 ohm pods use Vaporesso's Hive Mesh coil structure, branded COREX 3.0. On the XROS Pro 2, the honeycomb pattern increases heating surface area against the wick. This Vaporesso rates at approximately 40% more aroma intensity and around 30% smoother airflow than COREX 2.0.

Pods are top-fill with a silicone-sealed plug and SSS leak resistance against pocket spills. Refills are available across the full resistance range as COREX 3.0 refill pods.

Backward pod compatibility is the standout XROS Pro 2 feature for existing XROS owners. The Vaporesso XROS Pro 2 takes the full XROS pod range across both generations - COREX 2.0 pods and the newer COREX 3.0 Hive Mesh pods both fit the same chassis. The 2.0 and 3.0 difference is the coil generation inside the pod, not the pod fit itself.

0.96 Inch TFT Display and Button Controls

A 0.96 inch colour TFT screen replaces the basic LED row used on older XROS pod kits. The display shows live wattage in 0.1W increments, remaining battery, puff counter, coil resistance and active power mode.

XROS Pro 2 controls follow the standard Vaporesso click pattern: five clicks to power on or off. Three clicks to switch power mode, two clicks to lock the screen, plus a side fire button for manual draws. A clear adjustment wheel sits below the screen for wattage in standard mode, with a long-press to reset the puff counter for vapers tracking session use.

Auto-Draw or Button-Fire Activation

The Vaporesso XROS Pro 2 fires through both auto-draw and a side manual button by default, with either input triggering the coil. A short five-click lockout disables the auto-draw sensor for vapers who prefer button-only firing, and the same lockout cycles back to auto-draw on demand.

On the XROS Pro 2, the side fire button stays active across both modes. The result is that MTL inhalers on a 1.0 ohm pod and RDL users on a 0.4 ohm pod can run the same kit without trading control off. The five-click power lock doubles as a transport lock for pocket carry.

Vaporesso XROS Pro 2 Specifications

Vaporesso XROS Pro 2 Colour Options

The Vaporesso XROS Pro 2 comes in seven finishes, all built on the same magnesium alloy frame with the same 2000mAh battery and 0.96 inch TFT screen. Colour choice is the only difference between variants - performance is identical across every finish. All seven colours released together as part of the Vaporesso XROS Pro 2 launch range.

What's in the Box

• 1 x Vaporesso XROS Pro 2 device
• 1 x 0.4 ohm COREX 3.0 pod
• 1 x 0.6 ohm COREX 3.0 pod
• 1 x USB-C charging