Lost Mary BM6000 Pod Kit

Lost Mary BM6000 pod vape kit gives you everything the original BM6000 disposable kit did, without throwing anything away. Same flavours, same draw, same approximate 6,000 puff count per pod. Charge the kit and swap in fresh pods when the e-liquid runs out.

The kit ships with one Lost Mary BM6000 refill pod in your chosen flavour. A 1000mAh rechargeable battery powers the kit, with the OLED screen on the front showing the exact battery percentage at all times. Pods are filled with Lost Mary 20mg nic salt e-liquid. Many flavours sit across fruit, ice, menthol, and drink profiles from the Lost Mary vape range.

Key BM6000 Features

• 1000mAh Rechargeable Battery with USB-C charging, no cable in the box
• OLED Display shows live battery percentage
• QUAQ Mesh Coil at 1.1 ohm, tuned for nic salt e-liquid
• Auto-Refill System with the pod drawing from the 10ml container as you vape
• 20mg Nic Salt in every prefilled pod, 50/50 VG/PG
• Inhale Activated, no buttons, no settings to configure
• Blue and Yellow Body, the BM6000 signature colourway

QUAQ Mesh Coil and Auto-Refill

The Lost Mary BM6000 vape uses a QUAQ mesh coil at 1.1 ohm. Mesh heats the e-liquid more evenly than a standard round wire coil, so the flavour holds up better from start to finish. The coil is built into every BM6000 prefilled pod. There are no coil changes on this kit. When the pod is done, the whole refill pack swaps out.

The auto-refill system is straightforward. The 2ml pod sits on top of a 10ml container. As vaping continues, e-liquid feeds up from the container into the pod automatically. No topping up, no filling, no priming wait beyond the initial coil saturation. Once both the pod and container are empty, pull them out and slot in a fresh BM6000 refill pod.

1000mAh Battery and OLED Screen

The 1000mAh rechargeable battery in the Lost Mary BM6000 kit is bigger than most entry-level pod kits. Battery uptime varies by individual usage, draw style, and frequency. The OLED screen on the front shows the exact battery percentage during use, so there is no guessing about when the next USB-C top-up is due.

Alongside the battery readout, a visible e-liquid window on the side of the kit shows the level in the 10ml refill container. The combination of OLED battery percentage and visible e-liquid level removes the LED-flash code guesswork from smaller kits.

Flavour Options for the BM6000 Kit

Over 40 Lost Mary BM6000 kit flavours are available across fruit, ice, menthol, and drink profiles. The kit ships with one refill pod in your chosen flavour.

When stock for the next pod is needed, Lost Mary BM6000 refill pods are sold separately at Ecigone with all flavours in stock. Pricing for kit and refill pods is shown on the listing on this page.

BM6000 Pod Kit Specifications

How to Use the BM6000 Pod Kit

1. Take the Lost Mary BM6000 pod kit out of the box and remove the manual sticker
2. Pull out the silicone bung from the bottom of the kit
3. Push the 10ml refill container in firmly until it clicks
4. Turn the kit upside down and shake gently to clear air bubbles
5. Wait 2 to 3 minutes for the QUAQ mesh coil to saturate
6. Charge via USB-C before first use
7. Inhale to vape, no buttons needed

When both the pod and container run empty, pull them out and slot in a new refill pack. No coil changes needed.

Day-to-Day Use of the Lost Mary BM6000

The Lost Mary BM6000 pod kit is built to fit into a daily vape routine without much management. The OLED screen on the front shows live battery percentage, and the e-liquid level window on the side shows how much liquid is left in the 10ml refill container. Together they remove the guesswork that smaller LED-only kits leave behind.

Charging is via USB-C from any standard cable. The auto-refill system handles e-liquid flow automatically as vaping continues. The only routine actions are plugging in via USB-C when the OLED reads low, and slotting in a fresh refill pack when the container empties. The blue and yellow body colour is the BM6000 signature, making it instantly recognisable in the Lost Mary range.

Who Is the Lost Mary BM6000 For

The BM6000 sits in the middle of the Lost Mary rechargeable range. The kit suits four buyer profiles best:

• Ex-BM6000 disposable customers who want the same flavour and approximate 6,000-puff capacity in a rechargeable format
• Daily vapers who want a kit with both battery percentage and e-liquid level visibility, not just an LED light
• Vapers stepping up from the Lost Mary BM600 who want a longer-lasting pod
• Buyers who prefer the auto-refill container format over single click-in pods

BM6000 Troubleshooting Tips

Pros and Things to Know Before Buying

• Pro: OLED screen shows live battery percentage, no LED-flash code interpretation
• Pro: Auto-refill container removes the manual filling step from refill pod kits
• Pro: Same flavours as the original BM6000 disposable line
• Pro: Visible e-liquid level window on the side of the kit
• Pro: 12ml total e-liquid capacity per pack (2ml pod + 10ml auto-refill container)
• Pro: Removable battery at end of kit life - take to a WEEE recycling facility or any UK vape retailer with battery recycling for responsible disposal
• Things to know: The USB-C cable is not included in the kit box. Any standard USB-C cable works for charging
• Things to know: Pods are sealed at the factory and not designed for manual e-liquid topping up. The whole refill pack is replaced when empty
• Things to know: Puff counts and battery uptime are approximate and vary by draw style, frequency, and individual usage
• Things to know: The blue and yellow body design is the BM6000 signature. Different colourways are not part of the current Lost Mary BM6000 lineup

What's in the Box

• 1 x Lost Mary BM6000 Pod Kit (1000mAh rechargeable battery)
• 1 x 2ml Prefilled Pod (QUAQ mesh coil, 20mg nic salt)
• 1 x 10ml Refill Container
• 1 x User Manual
• USB-C cable not included