Hayati Pro Max Plus 6000 Prefilled Pod Kit

Hayati Pro Max Plus 6000: Refillable 6,000-Puff Pod Kit

The Hayati Pro Max Plus 6000 is the rechargeable prefilled pod kit from the Hayati range. It replaced the original single-use Hayati Pro Max after the UK disposable ban in June 2025, keeping the 6,000-puff session in a kit you charge and refill.

Each kit comes with an 850mAh USB-C battery body, one 2ml prefilled pod, and one 10ml auto-fill cartridge. That gives you 12ml of e-liquid in total and approximately 6,000 puffs per refill set, in your choice of 20mg nic salt, 10mg nic salt, or a 0% zero nicotine version. Every kit is UK TPD compliant and MHRA registered.

The pod and cartridge click together as one unit and slot into the kit body. Draw activation fires the mesh vape coil, so there are no buttons or modes to learn. Pick your starter flavour, then top up from the Hayati Pro Max Plus refill range when the first set empties.

Key Features at a Glance

• 850mAh USB-C Rechargeable Battery: full charge in about an hour from flat
• Draw Activated Kit Body: no fire button, no modes, no settings to learn
• Battery Screen: shows the charge level on the kit body
• Reusable Kit Body: the battery stays, only the pod and cartridge replace
• Approximately 6,000 Puffs Per Refill Set: across the 2ml prefilled pod and 10ml auto-fill cartridge
• Auto-Fill Cartridge Mechanic: the 10ml cartridge feeds the 2ml pod automatically as you vape
• Mesh Coil Inside Every Pod: even heating, sharp flavour from first puff to last
• Three Nicotine Strengths: 20mg nic salt, 10mg nic salt or 0% zero nicotine, sealed at the factory, UK TPD compliant, MHRA registered
• Mouth-to-Lung Draw: tight cigarette-style inhale, fixed airflow
• 96 Flavours: across the Hayati Pro Max Plus refill range

How the Hayati Auto-Fill Pod Works

Each refill is a two-part stack: a 10ml auto-fill cartridge on top, sitting on a 2ml prefilled pod.

• The cartridge feeds e-liquid down into the pod as you vape, with no manual filling
• When the pod and cartridge are both empty, pull the used unit out and click in a fresh pair
• Every new pod has a fresh mesh coil, so flavour stays sharp, with no cleaning or priming
• Refillable in the swap sense: keep the battery body, rotate through fresh refill packs
• "Auto-fill" means the cartridge feeds the pod, not filling the kit with your own bottled e-liquid

850mAh USB-C Battery and Inhale Activation

An 850mAh integrated lithium battery powers the kit body. USB-C charging gets it from flat to full in about an hour through any standard cable plus a 5V wall adapter or laptop port.

Inhale activation handles the firing, with no fire button, no menu, and no modes to learn. Draw on the mouthpiece and the mesh coil fires. The screen on the kit body shows the remaining charge level at a glance.

A USB-C cable is not supplied with the kit and needs sourcing separately.

Mesh Coil and Three Nicotine Strengths

Every Hayati Pro Max Plus pod uses an integrated mesh coil, with the e-liquid sealed in at your chosen strength. Mesh heats evenly across a wider surface area than older round-wire coils. Flavour clarity holds up from the first draw of a fresh pod to the last of the cartridge.

The fixed airflow is tuned for mouth-to-lung, the tight cigarette-style inhale. Nic salt at 20mg gives a smooth, fast nicotine hit without the throat harshness of freebase liquids, and the 10mg option softens that hit for lighter vapers.

The Pro Max Plus 6000 now comes in three strengths on the same kit: the standard 20mg nic salt, a gentler 10mg nic salt, and a 0% zero nicotine version with all of the flavour and none of the nicotine. Pick the strength alongside your flavour above. The nicotine free Hayati option covers 24 flavours and the 10mg option 25, with matching strengths across the Hayati Pro Max Plus refill pods so your kit stays on whichever suits. The zero nicotine version sits with the rest of our nicotine free vapes.

Setting Up Your Pro Max Plus 6000

1. Unbox the kit body and remove all protective seals.
2. Take the 2ml prefilled pod and 10ml cartridge from their sealed pack.
3. Click the pod onto the cartridge until both lock together as one unit.
4. Push the combined unit into the kit body until it clicks into place.
5. Give the kit a gentle shake and wait a minute for the coil to soak.
6. Draw on the mouthpiece to vape, inhale activated with no buttons.

Charge the kit via USB-C when the battery on the screen drops low. If the kit ever feels off, with a weak draw, no fire, leaking or burnt taste, the Hayati Pro Max Plus 6000 troubleshooting guide walks through every common fix.

Hayati Pro Max Plus Flavours

There are 96 Hayati Pro Max Plus flavours across the refill range. Every pod uses an integrated mesh coil, and a growing set of flavours now comes in 10mg and zero nicotine as well as the standard 20mg, so pick the profile first and the strength second.

Pick a starter flavour for the kit, or see every variant in the Hayati Pro Max Plus refill range across kit and refill packs.

The same Pro Max+ kit also takes the smaller Hayati Pro Max Plus 4K pods, rated at approximately 4,000 puffs per pack, in 30 of the original Hayati Pro Max flavours.

Hayati Pro Max Plus 6000 Specifications

Charging the Hayati Pro Max + 6000

The Pro Max + 6000 charges over USB-C in about an hour.

• 850mAh battery charged over USB-C, full from flat in about an hour
• The screen shows the battery level, so you can top up early
• USB-C cable not included, so any phone-style cable and a 5V adapter will do
• The 6,000-puff figure is the total across the full 12ml refill set, not per charge

What's in the Box

• 1 x Hayati Pro Max Plus 6000 kit body (850mAh rechargeable battery, battery screen)
• 1 x 2ml prefilled pod (mesh coil, chosen flavour and strength)
• 1 x 10ml auto-fill cartridge (matched to the pod flavour and strength)
• 1 x Instruction leaflet
• USB-C cable not included