Vaporesso Eco Nano 2 Pod Kit

The Vaporesso Eco Nano 2 is the second-generation Eco Nano pod kit, sitting between the original Eco Nano and the larger-battery Eco Nano Plus. Based around a 1000mAh internal battery with an AXON chip and Pulse Mode, the Eco Nano 2 uses the full Eco Nano pod range and works straight out of the box with the pre-installed 0.6 ohm Lush Mesh pod.

Auto-draw firing keeps it button-free, USB-C charging gets it back to full quickly, and a four-level LED reads battery state at a glance. Pair the Eco Nano 2 with a 10mg or 20mg nic salt for tight MTL, or a 50/50 e-liquid for warmer RDL. Refill pods come from the Eco Nano replacement pods page.

Key Features

• 1000mAh Internal Battery day-long power for typical MTL use
• AXON Chip with Pulse Mode keeps output steady from first puff to last
• COREX Heating with Lush Mesh warm, even draw on the pre-installed 0.6 ohm pod
• USB-C Charging quick top-ups via the bottom port
• Four-Level LED Indicator battery state at a glance, no menus
• Auto-Draw Firing inhale to vape, no fire button to press
• Full Eco Nano Pod Compatibility 0.6 ohm Lush Mesh, 0.6 ohm Mesh, 0.8 ohm and 1.2 ohm pods

1000mAh Battery and USB-C Charging

The Eco Nano 2 uses a 1000mAh internal battery, sized for typical all-day MTL or RDL use on a 0.6 ohm or 0.8 ohm pod. USB-C charging at the base pulls the battery back up quickly between sessions, so you are not waiting around to vape.

A four-level LED on the front of the device shows battery state in clear quarter-steps. There is no display screen and no menu, the LED tells you when to top up and the device gets on with the job.

AXON Chip with Pulse Mode

Vaporesso's AXON chip controls how power is delivered to the coil. Pulse Mode fires the coil in rapid pulses rather than a flat output, keeping flavour and vapour consistent from the first puff through to the last. The effect is a smoother, more even draw across the life of the pod, not the gentle fall-off you sometimes get from simpler pod kits.

COREX Heating and Lush Mesh Pod

The pre-installed pod uses Vaporesso's COREX heating tech with a 0.6 ohm Lush Mesh coil. Mesh lies flat against the wicking, heating e-liquid evenly across the surface for a warmer, more flavour-forward RDL draw than a standard coiled wire. Pair the Lush Mesh pod with a 50/50 freebase or a 10mg nic salt for the smoothest result.

You get a quick five-minute steep when the pod is fresh. Drop in your e-liquid, refit the pod and let it sit before the first puff so the wicking soaks through.

Pod Compatibility

The Eco Nano 2 takes the full Eco Nano 2ml pod range. The pre-installed 0.6 ohm Lush Mesh pod gives a smooth, warmer RDL draw straight out of the box. Swap to a tighter pod when you want a more cigarette-style MTL pull.

All four Eco Nano 2 pods take 2ml of e-liquid and refill through a side silicone plug. Nic salt at 10mg or 20mg works well across the range; a 50/50 freebase suits the 0.6 ohm pods for warmer flavour. Refills are stocked on the Eco Nano replacement pods page.

Specifications

What's in the Box

• 1x Vaporesso Eco Nano 2 Pod Kit
• 1x 0.6 ohm Lush Mesh Pod (pre-installed)
• 1x USB-C Charging Cable
• 1x User Manual