Lost Mary BM6000 Prefilled Pod Kit

The Lost Mary BM6000 is the rechargeable prefilled pod kit that took over from the original single-use BM6000 bar after the UK ban on disposables in June 2025. Vapers also search for it as the Lost Mary 6000, Lost Mary 6K and BM6000 Lost Mary, all the same kit.

The signature blue and yellow colourway is what most shoppers spot first. A 1000mAh USB-C battery sits behind a transparent OLED-fronted body. Each refill pack pairs a 2ml prefilled pod with a separate 10ml container, for 12ml of e-liquid in total.

Nicotine is fixed at 20mg Lost Mary nic salt, with a small group of flavours also stocked in 10mg. The wider Lost Mary vape range covers the rest of the brand's prefilled and refill lineup.

Key Features at a Glance

• Blue and Yellow Signature Body - colourway unique to the BM6000 line
• OLED Front Display - live battery percentage on every draw, no LED flash code
• 2ml Pod + 10ml Refill Container - 12ml total per refill pack
• Approximately 6,000 Puffs - per refill pack, varies with draw style
• 1000mAh USB-C Battery - around 30 to 45 minutes for a full charge
• QUAQ Mesh Coil at 1.1 ohm - built into every pod
• 20mg Nic Salt - with 10mg on selected flavours

The OLED Display and Transparent Body

The OLED screen on the front face is the BM6000's distinctive control surface. It lights up on every draw and during charging, showing the battery state as a live percentage rather than a colour-coded LED.

There is no menu to navigate. The screen is read-only feedback. As the battery drops below 20 percent the display can blink to flag a charge, and during charging it tracks the climb up to 100 percent.

A clear e-liquid window on the side sits alongside the screen. Battery state and remaining liquid are both visible at a glance without picking the kit up to inspect it.

How the Auto-Refill Container Works

The auto-refill mechanism is what sets the BM6000 apart from a straight prefilled pod kit. Each refill pack comes with two parts: a 2ml prefilled pod with the QUAQ mesh coil inside, and a separate 10ml container of matching nic salt.

The container has a sealed one-way valve at the base that locks onto a port on the pod. As e-liquid in the pod runs low, fresh liquid is drawn from the container into the pod and tops it up automatically while you vape.

You do not fill the pod yourself. The container is factory-sealed at the matched flavour and strength, and the valve only opens once mated with the pod port. When both pod and container are spent, the whole pack swaps out for a fresh one from the BM6000 refill range.

Blue and Yellow BM6000 Colourway

The BM6000 sits in a single body design. The transparent shell shows blue and yellow tones through the chassis, and that colourway is unique to the BM6000 line. The Lost Mary kit lineup otherwise uses different shells and finishes.

The flavour fitted to the pod sets the visible liquid tint inside the 10ml container, so the overall colour shifts slightly between SKUs. The kit body itself stays the same blue and yellow base across every flavour in the range.

For shoppers searching for the blue and yellow Lost Mary, the yellow and blue Lost Mary, or the BM6000 colourway by any other name, this is the kit.

Setting Up Your BM6000

1. Unbox the kit body and peel off the protective sticker.
2. Pull the silicone airflow plug from the base of the kit.
3. Clip the 2ml prefilled pod onto the 10ml refill container.
4. Slot the refill pack into the kit body until it seats flush.
5. Charge the kit to full over USB-C before the first session.
6. Wait 30 to 60 seconds for the QUAQ mesh coil to soak.
7. Inhale to vape. There is no fire button to hold.

The OLED reads the live battery percentage on every draw, and a standard USB-C cable is not included in the pack.

Lost Mary BM6000 Flavours

The BM6000 launched with a wide flavour catalogue spanning fruit, ice, menthol, classic and drink-inspired profiles, all 20mg Lost Mary nic salt across the standard range. Selected flavours are also stocked in 10mg for users stepping nicotine down.

Tap any flavour below to add to basket, or see the full lineup on the BM6000 refill range.

Troubleshooting the BM6000

Three signals come up most often during normal use, and each has a quick fix you can run before contacting Lost Mary support.

OLED dim or unresponsive on first use

Plug a USB-C cable into the base of the kit for 5 to 10 minutes. This wakes the battery from shipping mode. Unplug and inhale to draw, and the OLED should respond normally with the live percentage reading.

No vapour on inhale

Check that the silicone airflow plug has been removed from the base. Confirm the refill pack is seated firmly in the kit body. A slower, longer draw will trigger the airflow sensor more reliably than a short sharp pull.

Burnt or harsh taste

Pause for 30 seconds to let fresh e-liquid wick into the QUAQ mesh coil. If the burnt note persists, the pod has reached end of life and the refill pack needs replacing with a fresh one.

Lost Mary BM6000 Specifications

Spec	Detail
Product	Lost Mary BM6000 Prefilled Pod Kit
Puff count	Approximately 6,000 per refill pack (manufacturer rated)
Battery	1000mAh rechargeable, USB-C charging
Display	OLED front screen, live battery percentage
Prefilled pod	2ml pod with QUAQ mesh coil at 1.1 ohm
Refill container	10ml container, feeds the pod through a one-way valve
Total e-liquid	12ml per refill pack
Nicotine strength	20mg Lost Mary nic salt, with 10mg on selected flavours
E-liquid base	MaryLiq nic salt, approximately 50/50 PG/VG
Activation	Inhale activated, no fire button
Charge time	Approximately 30 to 45 minutes from empty over USB-C
Body colourway	Blue and yellow signature
Cable included	No, any standard USB-C cable works

What's in the Box

• 1 x Lost Mary BM6000 kit body (1000mAh rechargeable battery, OLED display)
• 1 x 2ml prefilled pod with QUAQ mesh coil at 1.1 ohm (chosen flavour and strength)
• 1 x 10ml refill container (matched flavour and strength, factory-sealed)
• 1 x User manual
• USB-C cable not included