OXVA NeXlim Replacement Pods

OXVA NeXlim Pods

OXVA NeXlim pods are the refillable dual mesh cartridges for every kit in the OXVA NeXlim range. You get three pods in a pack in one resistance, 0.6, 0.8 or 1.2 ohm, each with the coil sealed in, and you fill them from the top.

Most of the NeXlim pods we stock are OXVA's newer UNITECH 3.0 cartridge, the one that comes with the NeXlim 2, and the 1.2 ohm also comes in the original UNITECH 2.0. Pods for the Xlim and VPrime are in our OXVA pods range.

OXVA NeXlim Pod Features

• Dual mesh coil, built in
• Boost for up to 200% more flavour, Eco for up to 200% longer life, by OXVA's figures
• Up to 30 refills in Eco and 20 in Boost, by OXVA's testing
• Five layers of leak protection
• UNITECH 3.0: three times the condensate storage and priming in 30 seconds
• Top fill
• Nic salt or freebase e-liquid
• Three pods per pack

Dual Mesh with Boost and Eco

Every NeXlim pod has two mesh strips, and the mode on your NeXlim pod kit decides how they fire. In Boost both meshes heat together, which OXVA say gives up to 200% more flavour for a fuller, stronger hit. In Eco the meshes take turns, so each one rests between puffs and the pod lasts up to 200% longer with a lighter, softer hit.

NeXlim Cartridge UNITECH 3.0 vs UNITECH 2.0

Both versions fit every NeXlim kit, so the choice comes down to the cartridge. The UNITECH 3.0 cartridge is OXVA's update, and they list four changes from the original:

• Three times the condensate storage
• 300% better leak protection
• Primed in 30 seconds
• Smoother hits

The enlarged chamber at the base collects condensation inside the pod, so it does not reach the kit, your hands or your mouth. The original UNITECH 2.0 cartridge has the same dual mesh coil and still fits every NeXlim kit.

OXVA NeXlim 2 Pods

The NeXlim 2 comes with the UNITECH 3.0 cartridge, which some shops call the NeXlim V2 pod, and every NeXlim pod here fits it. OXVA list the same pods for all four NeXlim kits:

• OXVA NeXlim 2
• OXVA NeXlim 2 Mini
• OXVA NeXlim
• OXVA NeXlim Go

OXVA only list NeXlim kits for these pods. If you have another OXVA refillable vape, such as an Xlim, it takes its own Xlim cartridges.

NeXlim Pod Resistance and Wattage

Each resistance works in both modes, which is why OXVA count six ways to vape a NeXlim pod. These are OXVA's settings:

Pod	Mode	Draw	E-liquid	Wattage
0.6 ohm	Boost	RDL	Nic salt or freebase	36 to 40W
0.6 ohm	Eco	RDL or MTL	Nic salt or freebase	20 to 25W
0.8 ohm	Boost	RDL	Nic salt or freebase	28 to 32W
0.8 ohm	Eco	MTL	Nic salt	14 to 18W
1.2 ohm	Boost	RDL or MTL	Nic salt or freebase	20 to 25W
1.2 ohm	Eco	MTL	Nic salt	10 to 13W

The 0.6 ohm gives the loosest draw, the 1.2 ohm the tightest, and the 0.8 ohm sits between the two.

How Long Do OXVA NeXlim Pods Last

OXVA rate a NeXlim pod at up to 30 refills in Eco and up to 20 in Boost, from their own lab testing. How long yours lasts depends on the e-liquid you use, so change the pod when the flavour fades or starts to taste burnt. Like all our replacement pods, they come three to a pack.

NeXlim Cartridge Leaking

If an original UNITECH 2.0 cartridge is leaking, the UNITECH 3.0 cartridge is OXVA's answer, with its larger condensate chamber and stronger seal. Close the silicone plug fully after filling, and fit a fresh pod once the coil is worn. For more on filling and priming, read our guide to the OXVA NeXlim.

OXVA NeXlim Pod Specifications

Capacity	4ml standard, 2ml TPD (UK)
Coil	Dual mesh, built in
Versions	UNITECH 3.0, and UNITECH 2.0 in 1.2 ohm
Resistances	0.6, 0.8 and 1.2 ohm
Refill	Top fill
Size	29 x 17 x 41mm
Fits	NeXlim 2, NeXlim 2 Mini, NeXlim and NeXlim Go
Pack	3 pods

What's in the Pack

• 3 x OXVA NeXlim pods in your chosen resistance and version