Vaporesso XROS 6 Mini Pod Vape Kit

Vaporesso XROS 6 Mini Pod Kit

The Vaporesso XROS 6 Mini is the compact, screenless pod kit in the XROS series. It fits a 1600mAh battery into a pocketable body that weighs from 62g in the aluminium alloy version. VENTURI airflow, a 0.6 ohm COREX 3.0 mesh pod, 5-30W output and two power modes (Eco and Power) for MTL and RDTL vaping. No buttons needed, fires on inhale-only auto-draw. The XROS 6 Mini takes the full range of XROS pods from 0.4 ohm through to 1.2 ohm.

One COREX 3.0 mesh pod at 0.6 ohm comes in the box, tuned for MTL on 50% VG nic salts. A 5-LED battery indicator on the front of the kit shows charge level, each LED represents 20% of battery life. Coil priming takes 60 seconds, so you're vaping within a minute of dropping in a fresh pod. Pairs with nic salts and 50/50 e-liquids across the pod range. Also searched as the XROS Mini 6 or the Vaporesso Mini 6.

Eleven colours available across zinc alloy and aluminium alloy body finishes. USB-C charging, cable not included in the box. At 110.70 x 24.55 x 14.65mm, the XROS 6 Mini is the most pocketable kit in the XROS 6 line, still sharing the same pod platform. For the full-size kit with TFT screen and button activation, see the Vaporesso XROS 6.

New to the range? Our guide to which XROS model is right for you lines up every kit side by side.

Key Features

• 1600mAh Battery: approximately 4 days vaping per charge
• USB-C Charging: full top-up in around 57 minutes (cable not included)
• VENTURI Airflow: smoother, more intense draw
• COREX 3.0 Mesh Pod: 0.6 ohm pod included for MTL on nic salts
• Screenless Auto-Draw: inhale to vape, no buttons at all
• Two Power Modes: Eco Mode and Power Mode selectable
• 5-LED Battery Indicator: each LED shows 20% charge remaining
• 5-30W Output Range: tuned to pod resistance automatically
• Anti-Leaking v2.0: upgraded SSS pod seal
• 60-Second Coil Priming: ready to vape inside a minute
• Full XROS Pod Range: works with every XROS pod from 0.4 to 1.2 ohm
• From 62g: the most pocketable kit in the XROS 6 line
• 11 Colours: zinc alloy and aluminium alloy finishes

Up to 4 Days Per Charge

The 1600mAh battery on the XROS 6 Mini delivers approximately 4 days of vaping for an average MTL user. USB-C charging takes the kit from empty to full in around 57 minutes. The cable is not included in the box, but any standard USB-C cable will work. Battery health stays stable across long charging cycles thanks to the integrated charge management.

VENTURI Airflow on the XROS 6 Mini

VENTURI airflow carries across the XROS 6 line. The internal pod channel narrows then widens through the chamber, pulling vapour across the coil more evenly and stripping out the harshness you sometimes get on a wide-open MTL pull. The result on the XROS 6 Mini is a richer flavour profile and a quieter draw. The side airflow slider opens from a tight cigarette-style pull through to a looser RDTL hit, with enough mechanical resistance to stay put in a pocket.

Screenless Auto-Draw Activation

No screen, no buttons. The XROS 6 Mini fires on inhale-only auto-draw. To switch between Eco Mode and Power Mode, take two quick, short puffs in succession, the kit recognises the pattern and changes modes. This is the simplest interface in the XROS 6 line, designed for vapers who want a kit that just works without menu diving or button presses.

5-LED Battery Indicator

A row of five LEDs on the front of the XROS 6 Mini shows the current battery level. Each LED represents 20% of charge, five LEDs lit means full, one LED means it's time to recharge soon. The LEDs pulse briefly with each inhale and dim out between puffs to keep the body discreet in low-light environments.

COREX 3.0 Mesh Pods with Anti-Leak v2.0

COREX 3.0 is the third-generation mesh coil platform from Vaporesso. The mesh fires faster off the inhale, stays cooler through the draw and pulls more flavour from nic salts and 50/50 blends than the older mesh tech. The 0.6 ohm COREX 3.0 pod that ships with the XROS 6 Mini is tuned for restricted MTL on 50% VG nic salt e-liquids. Anti-Leaking v2.0 on the pod seal locks e-liquid in place between sessions, even when the pod sits unused.

XROS Series Pod Compatibility

The XROS 6 Mini takes every pod across the Vaporesso XROS line, from 0.4 ohm RDTL right through to 1.2 ohm tight MTL. Both COREX 2.0 pods and the newer COREX 3.0 Hive Mesh pods click straight into the XROS 6 Mini and seat firm. Swap to a 0.4 ohm for an RDTL hit or a 1.2 ohm for a tighter cigarette-style draw.

XROS 6 Mini Colours

Eleven colours on the XROS 6 Mini across two body finishes.

Is the Vaporesso XROS 6 Mini Available in the UK?

Yes. The Vaporesso XROS 6 Mini is in stock now at Ecigone in all eleven colours. UK orders over £30 get free next-day delivery, with same-day dispatch seven days a week when you order by 4pm.

Vaporesso XROS 6 Mini Specifications

What's in the Box

• 1x Vaporesso XROS 6 Mini Pod Vape Kit (1600mAh)
• 1x XROS Series 0.6 ohm COREX 3.0 Mesh Pod
• 1x User Manual and Warranty Card
• 1x Reminder Card

USB-C cable is NOT included.

Stock up on spare XROS replacement pods so you've always got a fresh set ready.