XROS 4 Mini Pod Vape Kit

The Vaporesso XROS 4 Mini is the stripped-back, set-and-forget kit in the XROS line-up. No screen, no fire button, no wattage menu to scroll through. A 1000mAh internal battery sits behind an inhale-activated AXON chipset that reads the resistance of whichever pod is fitted and matches power around 16W automatically. USB-C 2A charging takes approximately 30 minutes from flat to full, and the kit sits inside the wider Vaporesso XROS range as the simplest, most pocketable variant.

Most vapers land on the XROS 4 Mini for one reason: simplicity. Slide the airflow ring across for a tighter mouth-to-lung pull or open it for a looser restricted direct lung draw, click in a pod, and inhale. The pre-installed 0.4 ohm COREX 2.0 mesh pod sits in the RDL bracket, and the kit accepts every XROS pod from 0.4 ohm up to 1.2 ohm across both Corex 2.0 and the newer Corex 3.0 Hive Mesh generations. It is one of several pocket-format kits in the Vaporesso line-up, the wider Vaporesso brand collection covers everything from beginner pod kits to advanced sub-ohm setups.

Comparing the range? See how the kits line up in our XROS range comparison, step up to the newer XROS 5 Mini, or see the screen-equipped XROS 4.

Key Features

• No Screen, No Settings: inhale and the AXON chip matches power to the pod automatically
• 1000mAh Internal Battery: a full day of MTL vaping on a single charge
• 30-Minute USB-C Charge: 2A charging takes approximately half an hour from flat to full
• Full XROS Pod Compatibility: accepts every Corex 2.0 and Corex 3.0 pod from 0.4 to 1.2 ohm
• 0.4 Ohm Pod Pre-Installed: COREX 2.0 mesh, sits in the RDL bracket out of the box
• Adjustable Side Airflow: slider opens from tight MTL to open restricted direct lung
• RGB Battery Indicator: three-stage colour read on charge level, no screen needed
• Ten Colour Finishes: Ice, Camo and Standard families across the range

AXON Auto-Power and No-Screen Simplicity

The headline difference between the Mini and the standard XROS 4 is the lack of a screen and the lack of a fire button. There is no wattage to set, no power mode to step through, and no menu to learn.

Inhale, the AXON chipset detects the draw, reads the pod resistance, and fires the coil at roughly 16W. Fit a 1.0 ohm MTL pod and the output drops to suit a tighter, cooler draw.

Fit the 0.4 ohm RDL pod and the chipset pushes more current through the mesh for a warmer, looser session. The vaper does nothing, the kit handles it.

This makes the XROS 4 Mini a strong pick for first-time refillable pod vapers stepping off disposables. Equally for experienced vapers who want a second device that does not need attention. Output stays stable from full charge down to near-empty thanks to the AXON power management, so flavour and vapour do not taper off as the battery drains.

Battery Life and 30-Minute USB-C Charging

The 1000mAh internal battery is solid for a kit this size. MTL vapers using a 1.0 ohm or 1.2 ohm pod will comfortably get through a full day of casual use on a single charge.

RDL sessions through the 0.4 ohm or 0.6 ohm pod pull harder on the battery and drain it noticeably quicker. This is normal for any sub-ohm pod.

USB-C 2A charging takes approximately 30 minutes from flat to full, with passthrough vaping supported while the cable is connected. The RGB indicator on the front shows battery level at a glance: green for above 60%. Blue between 30% and 60%, and red when the battery is below 30% and ready for a top-up.

Adjustable Airflow for MTL and RDL

An airflow slider sits on the side of the chassis. Close it right down for a tight MTL draw close to a cigarette pull, or open it fully for restricted direct lung territory.

The slider holds its position in pocket, so the draw stays consistent from one vape to the next. Auto-draw activation works the same whether the airflow is closed off tight or wide open, the chipset compensates either way.

Pod Compatibility

The XROS 4 Mini takes every XROS pod from 0.4 ohm RDL up to 1.2 ohm MTL across both pod generations. One 0.4 ohm Corex 2.0 mesh pod comes pre-installed in the box. The pod shell is universal across the XROS family, so both Corex 2.0 replacement pods and the newer Corex 3.0 Hive Mesh pods fit the same magnetic connector. The generation difference is the coil technology inside the pod, not the pod fit. All XROS pods use side fill with a silicone plug and SSS leak-resistant technology.

How to Use the XROS 4 Mini

First-time setup is short, with no buttons or settings to learn. The pre-installed 0.4 ohm Corex 2.0 pod takes a 50/50 e-liquid or a 10-20mg nic salt e-liquid.

1. Lift the silicone bung on the side of the pod and fill to just below the line.
2. Click the bung firmly back into place and let the pod sit for two to three minutes.
3. Slot the pod onto the magnetic connector at the top of the device.
4. Open or close the side airflow slider to set the draw style.
5. Inhale to vape: there is no fire button and no settings to adjust.

The RGB indicator gives a quick read on charge state without any screen: green during a puff means plenty left. Blue means moderate charge, and red with a few short flashes means time to plug in.

Available Colours

The XROS 4 Mini comes in ten finishes split across three families. The Ice colourway has a translucent shimmer over a frosted shell in Blue, Green, Purple and Pink.

The Camo finish uses a matte multi-tone pattern in Silver, Red and Yellow. The Standard finish keeps things clean in solid Black, Space Grey and Champagne Gold.

Available colours rotate based on stock.

Specifications

What's in the Box

• 1x Vaporesso XROS 4 Mini Pod Kit
• 1x 0.4 ohm Corex 2.0 Pod (pre-installed)
• 1x USB-C Charging Cable
• 1x User Manual