OXVA Xlim Pro 2 Pulse-Mode Refillable Pod Kit

The OXVA Xlim Pro 2 pod kit pairs a 1300mAh battery with auto-draw activation and a 0.56-inch HD colour screen with three battery-level animations. It is the standard Pulse Mode edition of the Xlim Pro 2 platform from OXVA, sitting in the Xlim kit range as the direct successor to the original Xlim Pro.

The Pro 2 uses OXVA's Pulse Mode chipset with auto-detect wattage and is the everyday refillable pod kit in the Xlim Pro line. Vapers who want a higher-spec chipset can look at the Xlim Pro 2 DNA edition with its Evolv DNA chipset, or step up to the Xlim Pro 3 with its Photon chipset and IPX5 splash rating.

The OXVA Xlim Pro 2 release date was late 2024, launching as OXVA's best-selling Xlim pod kit, with the colour screen and Pulse Mode wattage curve the main upgrades over the original Xlim Pro.

Features at a Glance

• 1300mAh Battery - 30% larger than the original Xlim Pro, typically all-day for MTL vapers
• 0.56-Inch HD Colour Screen - three animation options (fireworks, vapour whirl, rainbow LED) with 1% battery readout
• Pulse Mode with Auto-Detect Wattage - chipset reads the pod and sets the power, manual 1W trim available
• Auto-Draw Activation - no fire button to press or pocket-fire by accident
• 2A USB-C Fast Charging - 0 to 100% in roughly 40 minutes via a fast charger
• Side Airflow Slider - RDTL down to tight MTL with a click-stay slider that holds its setting
• Full Xlim Pod Compatibility - accepts every OXVA Xlim cartridge except the Xlim C series

0.56-Inch HD Screen with Battery Animations

The 0.56-inch HD colour screen is centre-front on the OXVA Xlim Pro 2 vape and is the main user-facing change from the original Xlim Pro. The screen shows current wattage, pod resistance in ohms, a 5-digit puff counter, and the battery percentage in 1% increments.

Three animation options play while you vape: fireworks, a whirl of vapour, and a rainbow LED-only mode.

With fireworks or vapour selected, the LED strip beneath the screen colour-codes the battery level: blue at 60-80%, green at 80% plus, amber as it falls.

Rainbow mode disables the battery-coded LED but keeps the percentage on screen. Most OXVA Xlim Pro 2 review videos flag this screen as the standout daily-use difference from the original Xlim Pro.

1300mAh Battery and 2A USB-C Fast Charging

The Xlim Pro 2 carries a 1300mAh internal battery. For MTL vaping at 14-20W that means a full day of heavy use or roughly two days of moderate use between charges.

USB-C charging operates at 2A and reaches a full charge in around 40 minutes with a fast charger. A standard 1A USB-C cable takes closer to 80 minutes.

Pulse Mode and Auto-Detect Wattage

Insert an OXVA Xlim Pro 2 pod and the chipset reads the coil resistance, then applies the manufacturer-recommended wattage automatically.

A 0.6Ω pod fires around 22W, a 0.8Ω pod around 18W, a 1.2Ω pod around 12W. Pulse Mode keeps that power steady across the puff rather than tapering as the battery drops.

Want a softer or warmer draw? Three clicks of the button enters wattage edit mode, and each press steps power by 1W up to the 30W cap. Long-press the button at any time for the on-screen operating guide, with full OXVA Xlim Pro 2 instructions covered in the printed manual supplied with every kit.

Auto-Draw Activation and Adjustable Airflow

The Xlim Pro 2 fires on inhale alone. The side button only navigates the screen and adjusts settings, so accidental pocket firing - the most common cause of premature pod death on button-fire devices - is off the table.

Airflow on the OXVA vape Xlim Pro 2 is set by a slider on the opposite side. It clicks into position and holds the setting through pocket carry.

Sliding fully open gives a loose restricted DL draw suited to lower-resistance pods. Fully closed gives a tight MTL inhale that matches what disposables feel like.

Compatible with the OXVA Xlim Pod Range

The Pro 2 accepts every OXVA Xlim refillable cartridge except the Xlim C pods.

The full OXVA pod range covers 0.4Ω, 0.6Ω, 0.8Ω, 1.0Ω and 1.2Ω resistances across the V2, V3, top-fill and prefilled Xlim cartridge families.

For nic salt vapers, the OXVA Xlim Pro 2 pod vape kit pairs the 0.6Ω or 0.8Ω pods with 10mg or 20mg nic salt e-liquid. For 50/50 freebase 10ml bottles, the 1.0Ω or 1.2Ω resistances suit a tighter MTL inhale.

Each pod refills through a top side-fill port covered by a silicone plug.

OXVA Xlim Pro 2 Colours and Limited Edition

The OXVA Xlim Pro 2 comes in 19 finishes, led by the Champion Blue Limited Edition. Pick from the Python range (Green, Brown and Blue Python), the Carbon range (Black and Silver Carbon), Platinum Black and Grey, Titanium Grey and Blue, plus Dream Purple, Coral Pink, Rose Pink, Ocean Blue, Amber Orange, Jungle Green, Black Warrior, Dark Shadow and Black & White.

Range	Finishes
Limited Edition	Champion Blue Limited Edition
Python	Green Python, Brown Python, Blue Python
Carbon	Black Carbon, Silver Carbon
Platinum / Titanium	Platinum Black, Platinum Grey, Titanium Grey, Titanium Blue
Solid	Dream Purple, Coral Pink, Rose Pink, Ocean Blue, Amber Orange, Jungle Green, Black Warrior, Dark Shadow, Black & White

OXVA Xlim Pro 2 Specifications

Battery	1300mAh internal
Charging	USB-C, 5V/2A, approx 40 min full charge
Wattage range	5W to 30W, auto-detect with 1W manual trim
Chipset	OXVA Pulse Mode
Display	0.56-inch HD colour screen with 3 animations and 1% battery readout
Activation	Auto-draw (inhale-only, no fire button)
Airflow	Side slider, RDTL to MTL range
Pod compatibility	All OXVA Xlim refillable pods except Xlim C
Pods supplied	1 x 0.6Ω V3 mesh (fitted), 1 x 0.8Ω V3 mesh (spare)
Pod capacity	2ml TPD-compliant
Dimensions	114.5 x 25 x 15 mm
Weight	67g
Construction	Zinc alloy with leather or painted finish panels
Colour finishes	19 finishes including Champion Blue Limited Edition

What's in the Box

• 1 x OXVA Xlim Pro 2 device
• 1 x OXVA Xlim V3 0.6Ω pod (pre-installed)
• 1 x OXVA Xlim V3 0.8Ω pod (spare)
• 1 x USB-C charging cable
• 1 x fabric lanyard
• 1 x OXVA Xlim Pro 2 manual