OXVA NeXlim Pod Vape Kit

OXVA NeXlim Vape

The OXVA NeXlim vape is a 40W dual mesh pod kit with a 1500mAh battery, a 0.85 inch colour screen and Boost and Eco modes. It is part of OXVA's NeXlim series, which sits alongside the Xlim and VPrime in the wider OXVA vapes line-up.

Each cartridge in the NeXlim series has two mesh coils inside, so you get more flavour from one pod and a longer life from it too. It fires when you draw, and the side airflow slider takes it from a tight mouth to lung (MTL) draw to a looser restricted direct lung (RDL) draw.

To see how it compares, browse all the vape pod kits we sell.

The OXVA NeXlim 2 is the follow-up model on UniTech 3.0 pods, and the original NeXlim stays in the range in 18 colours.

OXVA NeXlim Features

• 5 to 40W output with Boost and Eco modes
• Dual mesh UniTech 2.0 coils in every NeXlim pod
• 1500mAh built-in battery with 5V/2A USB-C charging
• 0.85 inch colour screen with three themes
• Auto-draw firing with an 8 second cut-off
• Top fill pods you refill without taking them out, with a 5-layer leak-proof design
• Side adjustable airflow for MTL to RDL
• Zinc alloy body in 18 colours

Boost and Eco Modes

Boost mode fires both mesh coils at once for a bigger heating area and more flavour. Eco mode alternates between the two coils, so only one works at a time and the pod lasts longer. OXVA rate each NeXlim pod at over 15 refills. Press the button twice within two seconds to switch modes, and the screen shows which one you are in.

Dual Mesh Coils

Every NeXlim pod uses OXVA's UniTech 2.0 dual mesh coil, two mesh strips side by side instead of a single mesh strip. More mesh means more of the e-liquid is heated with each puff, which is where the extra flavour comes from. It works with both freebase and nic salt e-liquids.

0.85 Inch Colour Screen

The screen shows your wattage, battery level, mode and puff count. You can pick from three themes: Classic, with no lights or animations, Robot, with animations and breathing lights, and Cyberpunk, with colourful marquee lights that flash with every puff. Press the button four times within two seconds to change theme.

How to Use the OXVA NeXlim

To use the OXVA NeXlim, fill the pod, press the button five times to turn it on, then draw to vape. Every setting is changed with the one button:

To do this	Press the button
Turn on or off	5 times within 2 seconds
Switch between Boost and Eco	2 times within 2 seconds
Change the wattage	3 times within 2 seconds
Change the screen theme	4 times within 2 seconds
Reset the puff counter	7 times within 2.5 seconds
Read the on-screen guide	Long press

Before the first puff on a fresh pod:

1. Lift the silicone plug on the side of the pod and fill it through the port, with the pod still in the kit.
2. Close the plug straight away to help stop leaks.
3. Leave the pod for 5 to 8 minutes so the coil soaks through.
4. Turn the kit on and draw to vape.

The NeXlim stops firing if a puff lasts longer than 8 seconds, as a safety cut-off.

NeXlim Pods and Wattage

The NeXlim takes NeXlim cartridges in 0.6, 0.8 and 1.2 ohm, and it comes with a 0.6 ohm and a 0.8 ohm pod in the box. Set the wattage to match the pod, using OXVA's range:

Pod	OXVA wattage range
0.6 ohm	20 to 40W
0.8 ohm	12 to 32W
1.2 ohm	10 to 25W

Spare NeXlim replacement pods come in packs of three, and the same cartridges fit the NeXlim 2.

If you own more than one OXVA kit, the OXVA NeXlim pods, Xlim and VPrime cartridges are all together in one place.

For an e-liquid made by OXVA, OX Passion is their own range of OXVA nic salts.

Our guide to MTL and DTL OXVA vapes explains the difference between the two draws.

OXVA NeXlim Colours

The OXVA NeXlim comes in 18 colours: six patterned finishes and twelve solid colours.

NeXlim Patterned Finishes

• Chequered Grey
• Chequered Green
• Chequered Pink
• Terrain Black
• Traction Black
• Traction Grey

NeXlim Solid Colours

• Black Gold
• Black Warrior
• Coral Orange
• Dark Blue
• Dark Brown
• Dark Grey
• Glory Red
• Pearl Pink
• Pine Green
• Power Black
• Rose Gold
• Starry Blue

OXVA NeXlim Specifications

These are OXVA's specifications for the NeXlim, a refillable vape with a built-in battery you charge by USB-C.

Specification	Details
Output	5 to 40W
Battery	1500mAh built in
Screen	0.85 inch colour TFT
Charging	USB-C, 5V/2A
Firing	Auto-draw
Modes	Boost and Eco
Coils	Dual mesh, UniTech 2.0
Pods	NeXlim cartridges, 0.6, 0.8 and 1.2 ohm
Airflow	Side adjustable
Size	122 x 28.5 x 17.5mm
Weight	87.5g
Material	Zinc alloy, PCTG, PC/PU and aluminium

What's in the Box

• 1 x OXVA NeXlim device
• 1 x NeXlim 0.6 ohm cartridge (fitted)
• 1 x NeXlim 0.8 ohm cartridge
• 1 x USB-C cable
• 1 x User manual
• 1 x Button operation instructions

For every button function and setting in more detail, read our NeXlim beginner guide.