OXVA VPrime Pod Vape Kit

OXVA VPrime Pod Kit

The OXVA VPrime pod kit is one of the first pod kits with auto-draw DTL vaping at 60W. Just inhale and it fires, no button needed, even on the 0.2ohm pod at full power.

Sometimes written as the OXVA V Prime, it packs a 2600mAh battery that is the biggest in the OXVA range. A 0.96 inch colour screen shows wattage, resistance, and battery level.

If you want a pod kit that handles DTL cloud vaping without needing a box mod, this pod kit is built for that.

The VPrime sits alongside the Nexlim and Nexlim Go in the OXVA standalone pod kit range. Replacement pods are stocked across the OXVA pods range.

Four pod options cover DTL through to MTL. The 0.2ohm and 0.4ohm are for bigger lung hits. The 0.6ohm sits in the RDL middle ground, and the 0.8ohm gives a tight MTL draw for nic salts.

UniTech 2.0 coil tech with VPrime Connect contact pins is built into each VPrime pod for instant coil recognition.

Often searched as OXVA Prime, the kit comes in seven V Prime vape colours including leather and carbon finishes.

Key Features

• Auto-Draw DTL inhale to fire, no button press, works at up to 60W
• 2600mAh Battery all day use, USB-C charges in under 90 minutes
• 60W Output enough for DTL clouds or dial it back for MTL
• Unitech 2.0 Coils dual mesh tech built into every VPrime pod
• 0.96" Colour Screen wattage, resistance, battery, and built-in themes
• Four Pod Options 0.2Ω, 0.4Ω, 0.6Ω, 0.8Ω
• DTL, RDL, and MTL one kit covers all three vaping styles
• Adjustable Airflow twist the base to tighten or loosen the draw

Auto-Draw Technology

Most DTL pod kits need you to hold a fire button while you inhale. This kit skips that. Draw on the mouthpiece and it fires on its own, even at higher wattages on the 0.2Ω pod.

There is a fire button too if you would rather use it, but the auto-draw is what sets this kit apart.

The auto-draw works across all four pod resistances. With a 0.2Ω at 60W or a 0.8Ω at 14W for MTL, you get the same hands-free firing either way.

2600mAh Battery and 60W Output

The 2600mAh battery is big for a pod kit. With the 0.8Ω MTL pod at lower wattage, you will comfortably get a full day and then some. On the 0.2Ω at 60W you will burn through it faster, but it still holds up for a solid day of regular use.

USB-C charging brings the battery back from flat in under 90 minutes. The 0.96 inch colour screen tracks battery percentage so you are never caught off guard.

Unitech 2.0 Coils

Every VPrime pod has Unitech 2.0 coil tech built in. That is the OXVA dual mesh setup where two mesh strips sit side by side, spreading heat more evenly across the cotton. The coil part of the pod, so when flavour drops off you swap the whole thing for a fresh one.

the OXVA own figures claim up to 50% better flavour and up to 30% longer coil life compared to their standard single mesh coils. Browse VPrime replacement pods for all resistance options.

VPrime Pod Resistance and Wattage

The 0.8Ω is the go-to for nic salts at 10mg or 20mg. For bigger clouds and a wide open draw, the 0.2Ω with a 3mg shortfill is where this kit really comes alive. Our MTL vs DTL vs RDL guide covers the differences if you are not sure which style suits you.

0.96 Inch Colour Screen

The screen shows your current wattage, pod resistance, and battery level. You can tap to adjust settings and swipe through menus. There are built-in themes too so you can change the look of the display straight from the kit.

Colour Options

Seven finishes are available for the kit across leather, carbon, and solid colour options.

Kit Specifications

What is in the Box?

• 1 x OXVA VPrime Pod Vape Kit
• 1 x 0.2Ω OXVA VPrime Pod (pre-installed)
• 1 x 0.6Ω OXVA VPrime Pod
• 1 x USB-C Charging Cable
• 1 x User Suggestion Card
• 1 x User Manual