VooPoo Drag X3 Pod Kit

The VooPoo Drag X3 pod kit outputs 5-80W on a single external 18650 or 21700 battery (sold separately). Swap in a fresh 18650 when one drains rather than waiting for a charge, or use a 21700 for longer sessions. VooPoo's Drag X3 has a 1.66 inch smart touch screen with motion sensor unlock - pick it up and the screen wakes. Zinc alloy frame with leather grip in seven colours. Type-C 5V/2A charging if you'd rather charge the battery in the kit.

One PNP X DTL pod in the box with two coils: 0.15 ohm and 0.3 ohm, both sub-ohm. The Drag X3 also takes integrated Drag PNP X pods with integrated coils in 0.3, 0.8, and 1.0 ohm. Full PNP X coil range compatible from 0.15 ohm DTL through to 1.0 ohm MTL. Side-fill pods with adjustable airflow covering tight MTL to open DTL. Works with high-VG e-liquids, nic salts, and 50/50 e-liquids.

Key Features

• 5-80W adjustable output
• Single 18650 or 21700 battery (sold separately)
• 1.66" smart touch screen
• Motion sensor unlock, auto-lock safety
• PNP X DTL pod and 0.15/0.3 ohm coils included
• Integrated Drag PNP X pods compatible (0.3, 0.8, 1.0 ohm)
• Full PNP X coil range (0.15-1.0 ohm)
• Side-fill pods, adjustable airflow
• Type-C 5V/2A charging
• Six safety protections
• Zinc alloy and leather body
• Seven colours

Drag X3 Battery Options

18650 or 21700 - your choice. A 21700 holds more capacity than an 18650 so you'll get longer sessions before swapping. Both types slot into the base compartment. The kit's stable output doesn't drop off as the battery drains. Carry a spare 18650 and you've got unlimited runtime without plugging in. Type-C 5V/2A is there if you'd rather charge in the kit.

1.66 Inch Touchscreen and Motion Unlock

Swipe and tap to adjust wattage and navigate settings. The screen shows wattage, voltage, resistance, battery level, and puff count. The motion sensor wakes the screen when you pick the Drag X3 up. Auto-lock kicks in after a period of inactivity, stopping the kit from firing in a pocket or bag. No five-click unlock sequence needed.

PNP X Pods and Coils

Two pod types work with the Drag X3:

PNP X empty pods (included) take the full PNP X coil range via push-fit:

Two coils in the box: 0.15 ohm and 0.3 ohm.

Integrated Drag PNP X pods have integrated coils. Swap the whole pod when flavour drops:

Side-fill on both pod types with silicone plugs. Pick up replacement coils and pods from the VooPoo Drag range. The Drag X3 uses PNP X pods rather than a separate 510 tank.

Airflow and Safety

Sliding airflow control. Close for tight MTL with higher resistance coils, open for DTL on the 0.15 and 0.3 ohm coils.

Six safety protections inside: overtime (cuts after extended firing), over-temperature, overcharge, low battery, overcurrent, and short circuit. All automatic, no user action needed.

VooPoo Drag X3 Colours

Seven options with zinc alloy and leather finish:

VooPoo Drag X3 Specifications

How to Unlock and Change Wattage

To unlock the Drag X3, pick it up so the motion sensor wakes the screen, or press the fire button. To change wattage, swipe or tap up and down on the touch screen. The kit auto-locks after a spell of inactivity, so it will not fire in a pocket or bag.

What's in the Box?

• 1 x VooPoo Drag X3 Pod Kit
• 1 x PNP X DTL Pod Cartridge
• 1 x 0.15 ohm PNP X Coil
• 1 x 0.3 ohm PNP X Coil
• 1 x PNP X Platform Card
• 1 x Type-C USB Cable
• 1 x User Manual