Voopoo Drag 6 Vape Kit

Drag 6 Vape Kit by VooPoo

The VooPoo Drag 6 is a 220W internal battery vape kit running the GENE TT 3.0 chip with a 4400mAh total capacity (2 x 2200mAh). It comes paired with the UFORCE-X Tank II using PnP X coils and puts out 5 to 220W through a 1.66 inch TFT display. Wattage adjusts through a precision control wheel on the side, and a capacitive touch sensor handles locking and unlocking.

The latest in the VooPoo Drag series and the upgrade from the Drag 5, this kit ships with a PnP X 0.15 ohm and a PnP X 0.3 ohm coil for DTL and RDL vaping. Both coils pair with shortfill e-liquids and high-VG blends at 6mg or below. A spare glass section, USB-C cable, and silicone rubber set are all included in the box.

Key Features

• 220W output from 5W to 220W for full sub-ohm performance
• 4400mAh internal battery (2 x 2200mAh) with USB-C charging up to 5V/3A
• GENE TT 3.0 chip for fast firing, stable output, and safety protections
• Precision control wheel for smooth, accurate wattage adjustment
• Capacitive touch unlock to prevent accidental firing
• 1.66 inch TFT display for clear settings and battery monitoring
• UFORCE-X Tank II with top fill and refined airflow
• PnP X coil platform with 0.15 ohm and 0.3 ohm coils included
• Aluminium alloy body with stainless steel and glass tank construction

GENE TT 3.0 Chip

The GENE TT 3.0 is VooPoo's latest chipset and it handles everything from firing speed to safety. Response time is faster than the previous generation, so there's less delay between pressing fire (or touching the sensor) and the coil heating up. Output stays consistent across the wattage range, which matters more at higher power where cheaper chips tend to sag as the battery drains.

internal protections cover short circuit, overcharge, over-discharge, and over-temperature. The chip also supports a resistance range from 0.05 to 3.0 ohm, so it'll handle everything from the included sub-ohm PnP X coils through to higher resistance builds if you pair the device with a different tank.

Precision Control Wheel and Touch Unlock

The Drag 6 replaces the standard up/down buttons with a precision control wheel on the side of the device. Wattage adjustment is smoother and faster than button tapping, especially when you're jumping between the low and high ends of a 5 to 220W range.

Locking works through a capacitive touch sensor rather than a five-click sequence. Touch the sensor to unlock, release to lock. It prevents accidental firing in pockets or bags without the hassle of clicking a button five times every time you want to pick the kit up.

UFORCE-X Tank II and PnP X Coils

The kit ships with the UFORCE-X Tank II, which is VooPoo's updated sub-ohm tank with refined airflow and top fill. Two PnP X coils are included in the box:

Both coils work with high-VG shortfill e-liquids at 6mg freebase or below. The full PnP X coil range is available in the VooPoo coils collection, so you can try different resistances as you dial in your preferred setup. The tank fills from the top for quick refills.

Upgrading from the Drag 5

If you're coming from a Drag 5, the main upgrades on the Drag 6 are the GENE TT 3.0 chip (faster firing, more stable output), the precision control wheel replacing standard buttons, and the capacitive touch unlock system. The UFORCE-X Tank II is also a step up with refined airflow. Battery capacity stays at 4400mAh and the PnP X coil platform carries over, so your existing PnP X coils will work with the new kit.

VooPoo Drag 6 Specifications

What's in the Box

• 1 x VooPoo Drag 6 device (internal 2 x 2200mAh battery)
• 1 x UFORCE-X Tank II (PnP X)
• 1 x PnP X 0.15 ohm coil
• 1 x PnP X 0.3 ohm coil
• 1 x PnP X platform card
• 1 x Spare glass section
• 1 x Silicone rubber set
• 1 x USB-C cable
• 1 x User manual