SKE Bar 15K Pod Kit

Approximately 15,000 puffs from one pod set and a built-in puff counter to track every draw. The SKE Bar 15K is a rechargeable SKE Bar 15K prefilled pod kit with an 850mAh battery and mesh coil. You get 12ml of 20mg nic salt e-liquid split between a 2ml pod and 10ml refill container. This SKE bar 15000 kit is not a disposable. You recharge the battery and swap in fresh SKE Bar 15K refill pods when the e-liquid runs out.

The SKE 15k vape comes in 16 Crystal flavours, all prefilled with 20mg nic salt. An LED screen on the front shows battery percentage and puff count at a glance. Fixed MTL airflow with inhale activation and no buttons to press. If you know this kit as the SKE Crystal Bar 15K, SKE vape 15k, or SKE Crystal 15K, it's the same product.

Key Features

• Approximately 15,000 Puffs from 2ml pod plus 10ml refill container per set
• 850mAh Battery USB-C charging, 60 to 90 minutes from flat
• Puff Counter LED screen tracks puffs alongside battery percentage
• Mesh Coil built into every pod for full flavour throughout
• 16 SKE Crystal Flavours same flavours as the original Crystal Bar range
• 20mg Nic Salt prefilled in all pods
• Inhale Activated fixed MTL draw, no fire button
• Transparent Tank see your e-liquid level through the clear window

LED Display and Puff Tracking

What separates the SKE Bar 15K from other prefilled kits is the puff counter built into the LED screen. The display shows two things at once: your battery percentage and how many puffs you've taken from the current pod set. Both update in real time as you vape.

The puff counter is useful if you're tracking how much you vape or comparing actual puff counts against the approximate 15,000 figure. Draw length affects the total, so shorter puffs stretch further. The battery percentage reading means you're never caught out with a dead 15k puff vape. The old crystal 15k vape disposables just stopped without warning. This SKE vape 15000 puffs kit shows you exactly where you stand.

Pod Assembly and Replacement

The SKE Bar 15K uses a two-piece pod design. A 2ml prefilled pod connects to a 10ml refill container, and both slide into the kit together. The 2ml pod sits within TPD limits while the 10ml container feeds e-liquid in as you vape, giving you 12ml total per pod set.

Swapping pods on the SKE bar 15k pod kit takes seconds. Pull out the empty assembly and push in a new one from the SKE Bar 15K pods range. Every replacement comes with a fresh mesh coil built in. Nothing to prime, nothing to wait for.

850mAh Battery and Charging

The SKE bar 15k vape runs on an 850mAh battery that handles a full day for most MTL vapers. USB-C charging takes 60 to 90 minutes from flat. The battery outlasts a single pod set by a comfortable margin, so you won't be charging more often than swapping pods.

One thing worth knowing about the SKE 15000 puff kit: the power output stays level from full charge right through to low battery. The flavour and vapour you get at 20% battery matches what you get at 100%.

Mesh Coil

Every SKE Bar 15K pod has a mesh coil built in. Mesh spreads heat across a wider area than round wire, so the e-liquid vaporises more evenly. The result is fuller flavour that holds up from the first puff through to the end of the pod.

The mesh coil runs on 20mg SKE Crystal nic salts and gives you a tight MTL throat hit similar to what the Crystal Bar disposables produced. You don't change or prime coils on this kit. Each pod set has a fresh one built in. Our guide to SKE Crystal nic salt flavours covers what's available across the whole SKE range if you're after bottled e-liquid too.

SKE Bar 15K Flavours

The SKE Bar 15K comes in 16 flavours from the original SKE Crystal range. All pods are prefilled with 20mg nic salt and a mesh coil built in. This crystal vape 15000 puffs kit carries the same flavour selection as the Crystal Bar disposable range from before June 2025. You might also see it listed as the SKE crystal 15000.

SKE Bar 15K Specifications

How to Set Up the SKE Bar 15K

1. Open the box and take out the SKE Bar 15K kit
2. Peel off any protective stickers from the kit and pod
3. Remove the rubber plugs from both the 2ml pod and the 10ml container
4. Push the refill container firmly into the base of the pod until it clicks
5. Slide the connected pod assembly into the top of the SKE Bar 15K until it locks in
6. Inhale through the mouthpiece to start vaping
7. Check the LED screen for battery level and puff count
8. Charge with a USB-C cable when the battery runs low (cable not included)

Swapping Pods

1. Pull the empty pod and container assembly straight out of the kit
2. Push in a fresh set from the SKE Bar 15K refill pods range
3. Start vaping with no priming or wait time

Why Choose the SKE Bar 15K

The SKE Bar 15K gives you one of the highest puff counts in the SKE range at £7.99 for the kit. Each pod set lasts roughly a week for most vapers, and replacement pods cost less per puff than buying Crystal Bar disposables ever did. The built-in puff counter lets you track exactly how far each set goes.

What's in the Box?

• 1x SKE Bar 15K Vape Kit (850mAh battery)
• 1x 2ml Prefilled Pod with mesh coil (pre-installed)
• 1x 10ml Prefilled Refill Container (20mg nic salt e-liquid)
• 1x User Manual
• USB-C cable NOT included