Lost Vape Centaurus Nano MTL Tank

Centaurus Nano MTL Vape Tank

The Centaurus Nano MTL is Lost Vape's small mouth to lung tank, 27mm across and 51.8mm tall, which is short enough that it does not tower over a compact mod. It takes the UB MTL coils in 0.8ohm and 1.2ohm, and both of those are in the box.

Everything about it is aimed at the tight end. Airflow comes in at the top so the base stays dry, the coils cap out at 17W, and the two 510 drip tips it ships with are both narrow bore. Fill it with 10mg or 20mg nic salts and leave it alone.

Capacity is 4ml, which is 2ml on the UK TPD build, and a spare glass tube comes with it. The 510 fits any mod, though it was made alongside the Centaurus M120 S and the two are sold together as a kit.

Key Features

• 27mm across and 51.8mm tall, so it suits a small mod
• 4ml, and 2ml on the UK TPD build
• Top airflow with a knurled control ring
• Top filling under a sliding cap
• Two UB MTL coils in the box, 0.8ohm and 1.2ohm
• Two 510 drip tips, a classic fitted and a slim spare
• Metal frame around the glass to take the knocks
• Spare glass tube included

Top Airflow, Dry Base

Air enters at the top and travels down inside the tank to reach the coil, so the base has no holes in it at all. That is the single biggest cause of a tank marking a pocket, and it is why we point people at top airflow MTL tanks when they ask. The ring at the top adjusts the draw from tight to a looser mouth to lung.

The Two Coils

UB MTL coils, press fit, no threading to line up. The 0.8ohm sits at 7W to 11W for a slightly warmer draw, the 1.2ohm at 12W to 17W for the tightest one. Both are in the box, so there is nothing else to buy to get going, and spares sit with the rest of our replacement coils.

Two Drip Tips

A classic MTL tip is fitted and a slimmer one is in the spares bag. Both are 510, so anything else in your drawer goes on as well. It is a small thing that makes a real difference to how a tight draw feels against your lip.

Filling It

The top cap slides across to open the fill port, so the tank stays on the mod and the coil stays in place. There is no need to unscrew anything or turn it upside down. Two ports under the cap take a shortfill nozzle or a salt bottle without fuss.

What to Put It On

Any 510 mod. At 27mm it will overhang a 22mm tube but sits square on most box mods, and at 17W maximum it asks very little of a battery. On the Centaurus M120 S Kit it is the tank in the box, with the mod's MTL mode set up for exactly these coils.

Colours

Four: Silver, Black, Grey and Blue. The frame carries the Lost Vape mark and a window either side showing the glass and the level inside. Silver is polished, the other three are matte. The rest of the range is on our Centaurus page.

Specifications

Specification	Detail
Type	MTL tank
Capacity	4ml, and 2ml on the UK TPD build
Diameter	27mm
Height	51.8mm
Coils	UB MTL, 0.8ohm at 7W to 11W and 1.2ohm at 12W to 17W
Airflow	Top, adjustable ring
Filling	Top fill under a sliding cap
Drip tip	510, two supplied
Connection	510
Materials	SUS303 stainless steel, POM and borosilicate glass
Colours	Silver, Black, Grey and Blue

What's in the Box

• 1 x Centaurus Nano MTL Tank
• 1 x 0.8ohm UB MTL coil
• 1 x 1.2ohm UB MTL coil
• 1 x spare glass tube
• 1 x spare parts pack with the slim drip tip and o-rings
• 1 x user manual
• 1 x warranty card