Geekvape Digi Pro Pod Kit

The Geekvape Digi Pro pod kit has a 0.96 inch touchscreen you swipe and tap rather than clicking buttons. Three modes built in: Smart reads your coil and picks the wattage, Boost pushes harder for thicker vapour, and Eco drops output to stretch the battery. Geekvape have put a 2000mAh battery in this one with USB-C charging that gets it from flat to full in 30 minutes, and output goes up to 40W.

Two J Pod cartridges come in the box at 0.4 ohm and 0.6 ohm. The Digi Pro also takes JR Pods with replaceable J coils covering 0.4 ohm up to 1.2 ohm. Both cartridge types hold 2ml, fill from the top, and coils press-fit in. Top airflow on the cartridge adjusts between tight MTL and looser RDL. Dual activation means you can press the fire button or just inhale. Works with nic salts or 50/50 e-liquids depending on your coil.

Key Features

• 40W adjustable output, 5-40W range
• 2000mAh built-in battery, 30-min USB-C fast charge
• 0.96" touchscreen with swipe mode switching
• Three modes: Smart, Boost, Eco
• J Pod cartridges (0.4 ohm and 0.6 ohm included)
• JR Pod compatible with replaceable J coils (0.4-1.2 ohm)
• Top airflow, adjustable for MTL and RDL
• Dual activation: button-fire or auto-draw
• A-Lock via touchscreen to prevent pocket firing
• RGB light strip, changes colour with mode
• Eight colours including Ruby Red, Sakura Pink, Lavender Haze

Digi Pro 2000mAh Battery and Charging

2000mAh lasts all day on MTL wattages and 8-10 hours on heavier RDL draws. That's roughly 1000-1500 puffs depending on your mode and draw length. USB-C at 5V/2A gets it from flat to full in 30 minutes, which is fast for a 2000mAh cell. Overcharge and over-discharge protection built in.

0.96 Inch Touchscreen and Modes

Swipe left and right to switch modes instead of pressing button combos. The screen shows battery percentage, wattage, coil resistance, and puff count. Brightness adjusts automatically. The RGB strip down the side shifts colour based on which mode you're running.

Triple-click the fire button to cycle between them, or swipe on the touchscreen.

J Pod and JR Pod Cartridges

Two cartridge types fit the Digi Pro. J Pods have built-in coils, JR Pods take replaceable J coils so you swap the coil and keep the cartridge.

Nic salts work best on the 0.8 ohm and 1.2 ohm coils at lower wattages. 50/50 e-liquids suit the 0.4 ohm and 0.6 ohm for RDL. Pick up replacement cartridges and coils from the Geekvape J coil and pod range.

Top Airflow and A-Lock

Airflow control sits on top of the cartridge. Turn it for tight MTL or open it out for RDL. Having the airflow above the e-liquid line cuts down on leaking. Silicone seals and a liquid diversion plate inside the cartridge handle the rest.

A-Lock is a tap on the touchscreen. Lock icon appears, fire button and draw sensor disabled. Tap again to unlock. Stops the Digi Pro firing in a pocket or bag.

Geekvape Digi Pro Colours

Eight colours, all with the same RGB light strip:

Geekvape Digi Pro Specifications

Why Choose the Geekvape Digi Pro Pod Kit

A touchscreen you actually swipe rather than just a display showing numbers. Most pod kits with screens still need button combos to change settings. The Digi Pro lets you tap and swipe between Smart, Boost, and Eco modes directly on screen, and the RGB strip gives you a visual cue for which mode you're running.

2000mAh with 30-minute charging is fast for this battery size. J Pods and JR Pods give you the choice between swapping the whole cartridge or just changing the coil. The 0.4-1.2 ohm coil range covers MTL on nic salts through to RDL at 28W. If you want more power, the Digi Max runs 80W with a bigger battery and larger screen.

What's in the Box?

• 1 x Geekvape Digi Pro Pod Kit (2000mAh)
• 1 x 0.4 ohm J Pod Cartridge
• 1 x 0.6 ohm J Pod Cartridge
• 1 x USB-C Cable
• 1 x Promotional Card
• 1 x User Manual