Noctua RTA By Mods House

Mods House Noctua RTA

The Noctua is a 22mm single coil MTL RTA from Mods House in full 316L stainless steel, covering MTL through RDL with a triple chimney system and eight airflow configurations. The Noctua is built to pair with the Mods House Kust DNA60c at matching 22mm diameter, but it'll sit on any mod with a standard 510 connection.

Three interchangeable chimneys control the chamber volume. The 3.0mm and 2.5mm chimneys open the draw up for RDL vaping. The dedicated MTL short chimney tightens the chamber and works with swappable air pins from 0.8 to 2.0mm for a range of MTL draws. Air pins swap through the 510 connection while the tank is still full, so you can change your airflow without draining anything or touching the build.

The single coil deck uses double-sided terminals so you can mount your premade coil in either direction. Juice flow control lets you dial the wicking rate to suit whatever PG/VG ratio you're running. Quarter-turn top cap for filling with a pressure-managed fill system that keeps the tank from leaking after a refill.

Key Features

• 22mm diameter in 316L stainless steel
• Triple chimney system 3.0mm RDL, 2.5mm RDL, and short MTL chimney
• 8 airflow configurations via swappable air pins (0.8 to 2.0mm)
• Air pins swap through the 510 connection no need to drain the tank
• Single coil deck with double-sided terminals for either coil direction
• Juice flow control to manage wicking across all PG/VG ratios
• Quarter-turn top cap filling with pressure management
• Made in France by Mods House

Chimney and Airflow System

The triple chimney is where the Noctua separates itself from other MTL RTAs. Most tanks give you one fixed chamber with an airflow ring. The Noctua lets you physically swap the chimney to change the internal volume, then fine-tune the draw with air pins on top of that.

For RDL, the 3.0mm chimney gives the loosest draw with the most airflow. The 2.5mm chimney tightens it slightly. For MTL, the short chimney compresses the chamber around the coil and the air pins take over draw control from 0.8mm (tightest) through to 2.0mm (loosest MTL). All air pins swap externally through the 510 connection without removing the tank or emptying the liquid.

Noctua RTA Specifications

What's in the Box

• 1 x Mods House Noctua RTA
• 3 x Chimneys (3.0mm, 2.5mm, short MTL)
• Air pin set (0.8 to 2.0mm)
• Spare o-rings and accessories

Pick up cotton and wire for your builds, or browse other MTL RTAs and rebuildable tanks in the collection.