VooPoo Argus Snap Pod Cartridges

VooPoo Argus Snap Cartridges

VooPoo Argus Snap cartridges are the newest refillable pods in the Argus pod kit range. The black cap snaps backwards on a hinge to open the fill port, so there's no silicone plug to pull out or lose. VooPoo moved away from the older flip-open and side-fill designs with these.

You get 0.4Ω, 0.7Ω, and 1.0Ω integrated mesh coils with iCOSM CODE 2.0 golden cotton rated to 260°C. The coil lasts through up to 100ml of e-liquid before the pod needs changing. All three work with nic salts and 50/50 e-liquids, and the 0.4Ω takes higher VG freebase as well.

Key Features

• Snap-Off Fill Cap hinge design, no silicone plugs to remove
• Integrated Mesh Coils replace the whole pod when flavour drops
• 0.4Ω, 0.7Ω, 1.0Ω DTL through to tight MTL covered
• iCOSM CODE 2.0 golden cotton (260°C) and liquid-seal shield
• 100ml Coil Life golden cotton keeps going longer than standard pods
• 2ml Capacity TPD compliant
• Magnetic Fit same connection as every Argus kit
• 30-Day Leak Protection liquid-seal shield set into every pod

Argus Snap Pod Resistances

Most people start with the 0.7Ω. At 14 to 18W it's the crossover between MTL and RDL, and it's where 10mg or 20mg nic salts work best. Not too tight, not too open.

The 1.0Ω tightens up the draw at 10 to 14W for people who want something closer to a cigarette pull. On the other end, the 0.4Ω vapes warmer and looser at 18 to 30W for higher VG freebase and sub-ohm liquids.

Every Argus Snap cartridge uses the snap-off top-fill cap regardless of resistance. There's no side-fill version.

Snap-Off Fill Cap

Older Argus pods use either a flip-open silicone cap or a slide-across silicone plug depending on the resistance. The Snap cartridges got rid of both. Here is how to fill: one black cap on a hinge snaps back to open the port, you add your e-liquid, then it snaps forward to seal.

That's the main difference between these and the Argus Top Fill V2 cartridges. Same integrated mesh coils, same iCOSM CODE 2.0 tech, same magnetic connection. Just a different way to fill.

Worth knowing on the first fill: let the pod stand for about 10 minutes after adding e-liquid. The cotton needs time to soak through properly or you'll get a dry hit.

Compatible Argus Kits

The Argus Snap cartridges use the same magnetic connection as every other Argus pod. They fit:

• VooPoo Argus P3 (ships with Snap pods as standard)
• VooPoo Argus G3
• VooPoo Argus G3 Mini
• VooPoo Argus G2
• VooPoo Argus G2 Mini
• VooPoo Argus P2
• VooPoo Argus Z2
• VooPoo Argus A
• VooPoo Argus Matrix
• VooPoo Argus Klyc
• VooPoo Argus SE

The P3 is the only kit that comes with Snap pods in the box. Every other Argus kit ships with the Top Fill V2 pods, but you can buy the Snap cartridges separately and use them on any of those kits.

Argus Snap Cartridge Specifications

What's in the Box?

• 3x VooPoo Argus Snap Pods (0.4Ω, 0.7Ω, or 1.0Ω sold separately by resistance)