Sith RDA By Vaperz Cloud

Sith RDA

The Sith RDA by Vaperz Cloud is a top-of-the-line rebuildable dripping atomiser built for flavour chasers and collectors who want something unique. At 24mm diameter with a 25.5mm beauty ring included, it sits flush on most vape mods. The 24k gold-plated positive pin and post ensure maximum conductivity with a high-end aesthetic. Quick release squonk pin with spare screws set in the deck makes switching between drip and squonk modes easy. The semi-postless deck accepts coils through two 2.5mm x 3mm post holes for straightforward installation. A deep 4.5mm juice well means you can vape longer without constantly re-dripping.

The Ultem heat sink, airflow diffuser, and chamber reducer work together to create a unique airflow system. Air flows in smoothly, builds pressure, then diffuses onto the coil for superior flavour compared to standard RDAs. The reduced chamber and included tall and short 510 drip tips enhance the overall vaping experience. The locking top cap and rail system keeps everything secure. Perfect for vapers looking for something new and unique, the Sith RDA stands out in both performance and aesthetic.

Sith RDA Key Features

• 24mm Diameter
• 25.5mm Beauty Ring Included
• 24k Gold-Plated Positive Pin & Post
• Quick Release Squonk Pin
• Spare Screws Set in Deck
• Semi-Postless Deck
• For Single Premade Coil Builds
• Two 2.5mm x 3mm Post Holes
• 4.5mm Deep Juice Well
• Ultem Heat Sink
• Ultem Airflow Diffuser
• Ultem Chamber Reducer
• Locking Top Cap & Rail System
• Tall & Short 510 Drip Tips Included
• Spare Screws & O-Rings
• Solid 510 Pin Included
• Squonk & Drip Compatible
• Made by Vaperz Cloud

24k Gold-Plated Positive Pin & Post

The Sith RDA features a 24k gold-plated positive pin and post for maximum conductivity. Gold plating reduces voltage drop between your battery and coil, meaning more power reaches your build. The gold plating also adds a premium aesthetic - the gold components contrast nicely with the RDA body. This high-end finish shows Vaperz Cloud's attention to detail.

Quick Release Squonk Pin

The quick release squonk pin with spare screws set in the deck makes switching between drip and squonk modes straightforward. Unscrew the solid 510 pin, replace it with the squonk pin, and you're ready to use it with bottom-feed mods. The spare screws are stored in the deck so you don't lose them. Switch back to drip mode just as easily.

Semi-Postless Deck

The semi-postless deck features two 2.5mm x 3mm post holes for coil installation. This design gives you the space of a postless deck while maintaining secure post holes for your coil legs. Tighten down your coils, trim the legs, wick, and you're done. The deck layout accepts standard coil sizes and various build styles.

Deep 4.5mm Juice Well

The 4.5mm deep juice-well holds enough e-liquid for multiple draws before needing to re-drip. This means less frequent dripping during sessions. The deep well also helps prevent leaking - excess e-liquid stays in the well rather than seeping through the airflow.

Ultem Airflow System

The Sith RDA uses Ultem components for its unique airflow system. The Ultem heat sink sits under the build deck to manage heat. The Ultem airflow diffuser directs air smoothly onto your coils. The Ultem chamber reducer tightens the chamber for concentrated flavour. These three Ultem pieces work together - air flows in, builds pressure, then diffuses onto the coil for superior flavour compared to standard bottom airflow RDAs.

Reduced Chamber for Enhanced Flavour

The chamber reducer tightens the space between your coils and the drip tip. This concentrated chamber pushes flavour intensity higher by reducing the distance vapour travels before reaching your mouth. Combined with the airflow diffuser, the reduced chamber delivers dense, flavourful hits.

Locking Top Cap & Rail System

The locking top cap and rail system keeps everything secure during use. The rail system guides the cap into position while the locking mechanism prevents it from coming loose in your pocket or bag. No spinning top cap, no accidental openings - just secure, reliable performance.

Tall & Short 510 Drip Tips

The Sith RDA includes both tall and short 510 drip tips. Use the tall drip tip for cooler vapour and more airflow. Use the short drip tip for warmer, more concentrated flavour. Both are 510 compatible, so you can also use your own preferred drip tips.

Why Buy the Sith RDA?

The Sith RDA brings unique Ultem airflow system engineering for superior flavour. The 24k gold-plated pin and post ensure maximum conductivity with premium aesthetics. Quick release squonk pin makes switching between drip and squonk modes easy. Semi-postless deck with 4.5mm juice well handles various builds. Reduced chamber and airflow diffuser concentrate flavour. At 24mm with 25.5mm beauty ring, it fits most mods. Perfect for collectors and flavour chasers who want something different.

What's in the Box?

• 1 x Sith RDA
• 1 x 25.5mm Beauty Ring
• 1 x Tall 510 Drip Tip
• 1 x Short 510 Drip Tip
• 1 x Solid 510 Pin
• 1 x Quick Release Squonk Pin
• 1 x Spare Screws
• 1 x Spare O-Rings