Nola RTA By Mods House X Khonsu Tech

Nola RTA

The Nola RTA is a 22mm single coil RTA from Mods House and Khonsu Tech in black PVD stainless steel. The Nola covers MTL through RDL and into open DL territory using a combination of bottom and side airflow pins. It's not built for extreme builds like 4mm coils at 0.15 ohm, but it handles everything from a tight restricted draw right up to a comfortable lung hit. Collaboration between the two brands with Khonsu Tech handling the design in Egypt and Mods House producing in France.

The deck uses a pull-off access system similar to a FEV. Large screws and a dedicated coil alignment groove make positioning straightforward, and the wicking channels are cut to keep things clean on the wick and tuck. Juice supply runs through two fixed drivers with a rotating tank juice control system, so you can dial the liquid flow to suit your build and PG/VG ratio. Quarter-turn top cap for easy refilling too.

One colour only in black PVD. Both a glass tank section and a PCTG tank section are included in the box, so you can run whichever you prefer. Compact at 22mm x 35mm, making it a good match for single battery mods and SBS setups including the Mods House Kust DNA60c.

Key Features

• 22mm x 35mm in black PVD stainless steel
• MTL, RDL, and DL via bottom and side airflow pins
• Bottom airflow pins 0.8, 1.2, 1.5, 1.8, 2.0, 2.5, 3.0, 3.5mm
• Side airflow pins 2 x 2.0mm and 2 x 1.5mm
• Pull-off deck access similar to a FEV
• Large screws with coil alignment groove for easy builds
• Rotating tank juice control with two fixed drivers
• Quarter-turn top cap filling
• Glass and PCTG tank sections both included
• Drip tip included
• Khonsu Tech design, Mods House production

Airflow System

Bottom and side airflow pins work together to shape the draw. Eight bottom pins from 0.8mm up to 3.5mm set the baseline restriction. The four side pins (two at 2.0mm and two at 1.5mm) add lateral air to open things up further for RDL and DL draws. At the tight end, the 0.8mm bottom pin with no side air gives a proper restricted MTL pull. At the open end, the 3.5mm bottom pin with the 2.0mm side pins gives a full DL draw.

Nola RTA Specifications

What's in the Box

• 1 x Mods House x Khonsu Tech Nola RTA
• 1 x Glass tank section
• 1 x PCTG tank section
• 1 x Drip tip
• Additional airflow pins

Pick up cotton and coils for your builds, or browse other rebuildable tanks in the collection.