Aston RTA by AllianceTech Vapor

AllianceTech
E11332265HG1460S
In stock
Hardware
🔔 ECIGONE SPECIAL OFFERS 🔔
LIQUID DISCOUNT APPLIES AT CART
NO CODES VALID AGAINST CLEARANCE
RRP £64.99 Our Price £39.99
£39.99
Aston Vape is a brand which is a reconstructable within everyone’s reach and has irreproachable quality fabrication. It is Alliancetech Vapor which occupies the design and you can find the very well-known assembly plate which is on the Aston RTA. Simple and efficient, the assembly in mono coils, with simple or complex, are possible and easy to install.
With a pure figure which gets straight to the point, Aston Vape proposes 2 tanks depending on your preferences: Transparent Pyrex or Opaque PSU.
On the aeration side, the Aston RTA offers a vape 100% in indirect inhaling, with only one opening of 1.8mm in diameter. Or even an inhaling which is more aired with 2 openings of 2mm on each side of the atomizer. To resume, the Aston RTA is polyvalent in flavour and vapor and is always precise gracious to the impeccable fabrication.
Aston Vape
Aston RTA by AllianceTech Vapor - Ecigone
The Aston RTA atomizer has a figure and look which is pure and elegant which will have an effect on an electronic or mechanic mod. Compact in size, the space is also minimum. The Aston RTA only measures up to 30mm in height for diameter in 24mm. The care is also placed on the quality of the drip tip. Made in black Delrin, this 510 is perfect for a vape in MTL and restrictive DL. The Aston RTA is made in robust Stainless Steel 304L which is resistive to scratches.
Flavored Atomizer
Aston RTA by AllianceTech Vapor - Ecigone
The niche of the Aston RTA is towards flavors. In effect, the aeration is made to bring the best flux of air with a tight or aired pull. The Aston proposes 2 settings: one or two openings at the base of the atomizer, which can be associate with the 2 openings directing the air under the coil. No loss with the atomization chamber, the flavours remain concentrated towards the drip tip.
A Mono Plate
Aston RTA by AllianceTech Vapor - Ecigone
This plate 100% Alliancetech Vapor offers us the Aston RTA atomizer. The assembly plots are sufficiently open to welcome the simple coils as well as the complex coils. Small fused Clapton coils are welcome! The rendering is ideal from 0.30 Ω to 0.50 Ω. Precise the Aston RTA Plate places the coil at an ideal height. All that remains is to screw the coil and cut the excessive resistive wire.
Filling And Reservoir 
Aston RTA by AllianceTech Vapor - Ecigone
Aston Vape offers 2 Opaque in PSU or transparent in Pyrex. The filling is effectuated from the top by unscrewing the top cap. The reservoir is accessible for all types of bottles with pourers.
Aston RTA by AllianceTech Vapor - Ecigone

 

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
50%
(1)
0%
(0)
0%
(0)
J
J.F.
It’s okay

This is an ok RTA. Quite nice flavour and draw but it feels cheap. I find it also seeps juice out the bottom no matter how much cotton I use and it’s easy to flood the deck when filling. It’s not terrible but it’s not that good either.

Z
Z.
A nice surprise

I took a punt on this rta as the only review I could find was in French and was more about what it was, not how it is.
Presentation, looks, machining and overall build quality is excellent.
The build deck is very easy to use and the wicking couldn't be easier.
Airflow is controlled by the standard ring type at the bottom with either 2 x 1.8mm holes or one. You can half close just one hole for a tighter draw which is what I prefer.The top fill cap was a little tight and there's not much to grip but once lubed it is easy enough to remove for filling.
The drip tip is relatively wide for MTL but as it's a standard 510 fitting changing out is a doddle.
Finally the important bit. Flavour. It is very good indeed. I was surprised at this as the roof of the chimney is flat, not domed. I'm using my go to liquid and the flavour is spot on.
You get the usual spare o rings etc and a spare polycarb tank.
I'm very impressed with this rta and it looks great too.

DELIVERY METHOD

Cut off times for some day dispatch is 2pm for Amazon & 4 pm for all other services.

Orders placed after these times will dispatch the next working day.

Royal Mail 1st Class Signed For 1-3 Working Days - This is not a guaranteed service. Please allow a little longer during busier periods.

£4.49 under £30

£3.39 over £30

FREE over £60

Royal Mail 2nd Class Signed For 2-5 Working Days - This is not guaranteed service. Please allow a little longer during busier periods.

£3.80 under £30

FREE over £30

InXpress (DHL) - Next working Day 

(UK Mainland)

Next Working Day Service. 1 Hour Time Slot.

Mon-Fri(Excluding Weekends & Bank Holidays)

£3.99 under £30

£2.99 over £30

FREE over £60

Amazon Shipping (UK) 1-2 Day service. Please allow a little longer during busier periods. In some cases, your postcode may cause the system to create an RM48 Label which still passes through Amazon Depots but will take a little longer to arrive. This can be down to lack of drivers in your area at the time of dispatch or distance from our local depot.

£1.99 under £30

FREE over £40

UPS - Next Working Day

(UK Mainland)

Next Working Day Service.

Mon-Fri(Excluding Weekends & Bank Holidays)

£4.97 under £30

FREE over £60

DPD - Next Working Day

(UK Mainland)

Next Working Day Service.

Mon-Fri(Excluding Weekends & Bank Holidays)

£5.55 under £60

£3.00 over £60

FREE over £100

DPD SAT - Saturday Delivery

(UK Mainland)

Saturday Delivery - Your order must be placed before 4 pm Friday. Orders placed after this time will be sent the following Monday via DPD Next Day Service and you will be reimbursed the difference.

£7.68 under £60

£4.48 over £60

International Shipping

Shipping Rates are calculated at checkout for your specific country. You will be given options from InExpress, Royal Main & UPS

 

PLEASE BE AWARE;
You will have import duty & fees upon arrival of your parcel.
We have removed the VAT from international purchases, so you are not charged twice!

Calculated at Checkout

 

FEATURES:

  • Dimensions: 43 mm x 24 mm with drip-tip
  • Material: SS 304 L/PSU/Pyrex/Delrin
  • Drip-tip: 510
  • Type Of Plate: Double post (flat)
  • Type of Assemblies: Simples coils

 

WHAT'S IN THE BOX:

  • 1 x Aston RDA
  • 1 x PSU Supplementary Reservoir
  • 1 x detached Pieces Kit
  • 1 x Screwdriver
  • 1 x Notice

Have Questions?Ask An Expert
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Aston RTA by AllianceTech Vapor
You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed Products
ic-cross-line-top
Top
ic-expand
ic-cross-line-top