we present ADE.
the bottom feeder that you will never leave at home.
imagine an important evening. an evening in which you need elegant clothing, and little weight on you. imagine having an e-cig that stands out in just 59 grams in weight. imagine a unique tactile feedback and optimal balance, an indestructible shell, and a honeycomb grid capable of containing the liquid that could ruin your precious dress. directly from the laboratory of the most expert Florentine craftsmen.
See tab for all the great features and advise for this wonderful mod
(BOTTLE IS NOT INCLUDED)
MECHANICAL SAFETY SWITCH CHILD-PROOF double acting
of our invention, allows you to physically detach the circuit.
accessible from outside the box via the two steel buttons immediately below the button,
just slide both buttons towards the atomizer, and the circuit is ON!
otherwise, pulling back even one, the circuit is interrupted.
you will no longer be afraid of being activated in your pocket.
Openings inspired by the automotive sector. Two different models, same function:
limit condensation and create escape routes for battery fumes in case it is defective.
"FIRE" BUTTON WITH ISOLATED MAGNETS
New generation button.
Fully plated in 999 silver, with a fanciful and refined design.
The ignition reactivity is such as to make you compare your ADE to a mechanical tube.
with ADE you can adjust the air holes of the atomizer by rotating the cup by 18mm.
We have provided a cup that can be rotated every 60 degrees, simply by unscrewing the saucer, rotating the cup, and screwing the saucer again.
Thanks to the separation of the bottle compartment from the battery compartment,
the possibility of putting the battery in contact with the liquid is close to zero.
designed to retain the drops of liquid that could come out of the bottle,
We have made sure that your ADE is practically maintenance-free. But if you spill a liter of liquid on it, well ... dismantle the button as a precaution and put it under water! drying with paper towels and you will be back on track.
Dimensions: 75x49x25 mm
Empty weight: 59g
Box Mod Mechanics Bottom Feeder
Hyperconductive magnet button
Possibility to insert bottles up to 9 ml
Pin to be adjusted manually
Supports 18650 Battery
Body and doors in PA12 full 3D printed nylon
Finishes in hand-polished 316L stainless steel
Electrical circuit in Lead-free 999 Silver plated Brass with high thickness Nickel Free
Fully washable and polishable with due precautions (ref. USE AND MAINTENANCE BOOKLET)
PLEASE NOTE THAT THE CIRCUIT HAS NO ELECTRICAL SAFETY and must be used following the principles of the OHM Law.
USABLE ONLY BY USERS WHO HAVE THE DUE KNOWLEDGE IN THE TECHNICAL FIELD and in particular on the principles that regulate electric currents and resistances (OHM Law).
What's in the box: